NU32v2: What is in the NU32v2 Kit

From Mech
Revision as of 23:34, 14 January 2011 by Lynch (talk | contribs)
Jump to navigationJump to search

**THIS PAGE IS UNDER CONSTRUCTION AND IS NOT COMPLETE**

**NDM 1/13/2011**


The NU32v2 kit.

Table of components in the kit:

Picture Description Link
picture of board.
 NU32v2 in 2 breadboards with switch (between GND and G6 pins) no link
picture of usb cable.
 1 m USB cable, A male to mini B male Datasheet
picture of 9V power supply.
 9V wall power supply, 0.66A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model EPS090066-P5P from CUI Inc. Datasheet
picture of 3 to 1 power outlet.
 1 to 3 power outlet, 2 prong to 3 prong Powtech PT-7803GG
picture of wirestrippers.
 Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. Do not try to cut anything else with these, they will get dull Sparkfun wire strippers
picture of wire.
 6 colors of 6" sections of 22 AWG solid core wire (Red, white, yellow, green, black, blue) no link
picture of Nokia 5110 LCD.
 Monochrome Nokia LCD, 84x48 pixels, SPI communication Nokia 5110, Datasheet
picture of multimeter.
 Small multimeter, Velleman DVM810. Does not have automatic shutoff. Battery will not last more than 12 hours if left on. Multimeter, Datasheet
picture of led array.
 10 LED array, green. Datasheet
picture of extra breadboard.
 Extra breadboard, 830 tie points 830 T/P Breadboard
picture of resistor array.
 9 pin, 8 resistor 330 Ohm common cathode bus. Dot indicates common pin Datasheet
picture of pushbutton.
 Momentary NO pushbutton Datasheet
Retrieved from "https://hades.mech.northwestern.edu//index.php?title=NU32v2:_What_is_in_the_NU32v2_Kit&oldid=19433"