Difference between revisions of "NU32v2: What is in the NU32v2 Kit"

From Mech
Jump to navigationJump to search
 
(9 intermediate revisions by one other user not shown)
Line 1: Line 1:
'''THIS PAGE REFERS TO A PRE-RELEASE VERSION OF THE NU32 PIC32 DEVELOPMENT BOARD. FOR INFORMATION, SAMPLE CODE, AND VIDEOS RELATED TO THE PRODUCTION VERSION (2016 AND LATER), AND TO THE CORRESPONDING BOOK "EMBEDDED COMPUTING AND MECHATRONICS WITH THE PIC32 MICROCONTROLLER," VISIT [[NU32|THE NU32 PAGE]].'''
'''**THIS PAGE IS UNDER CONSTRUCTION AND IS NOT COMPLETE**'''

'''**NDM 1/13/2011**'''




[[Image:nu32v2_kitbag.jpg|thumb|500px|The NU32v2 kit.|center]]
[[Image:nu32v2_kitbag.jpg|thumb|500px|The NU32v2 kit.|center]]


The NU32v2 kit contains everything necessary to begin programming the NU32v2 board. Check to make sure your bag contains all of the items listed below.
Table of components in the kit:


'''Components in the kit:'''


<table border="1">
<table border="1">
<tr>
<tr>
Line 15: Line 18:


<tr>
<tr>
<td>[[Image:nu32v2_breakoutbreadboardsswitch.jpg|thumb|200px|picture of board.|center]]</td>
<td>[[Image:nu32v2_breakoutbreadboardsswitch.jpg|thumb|200px|The NU32v2|center]]</td>
<td>NU32v2 in 2 breadboards with switch (between GND and G6 pins)</td>
<td>NU32v2 in 2 breadboards with a switch between GND and the G6 pin</td>
<td>[[NU32v2: Software to Install]], [[NU32v2: Starting a New Project and Putting it on the NU32v2]]</td>
⚫
<td>no link</td>
</tr>
</tr>


<tr>
<tr>
<td>[[Image:nu32v2_usbcable.jpg|thumb|200px|picture of usb cable.|center]]</td>
<td>[[Image:nu32v2_usbcable.jpg|thumb|200px|USB Cable|center]]</td>
<td>1 m USB cable, A male to mini B male</td>
<td>1 m USB cable, A male to mini B male</td>
<td>[[Media:usbcable.pdf|Datasheet]]</td>
<td>[[Media:usbcable.pdf|Datasheet]]</td>
Line 27: Line 30:


<tr>
<tr>
<td>[[Image:nu32v2_9vpower.jpg|thumb|200px|picture of 9V power supply.|center]]</td>
<td>[[Image:nu32v2_9vpower.jpg|thumb|200px|9V Power Supply|center]]</td>
<td>9V wall power supply, 0.66A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model EPS090066-P5P from CUI Inc.</td>
<td>9V wall power supply, 0.66A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model EPS090066-P5P from CUI Inc.</td>
<td>[[Media:powersupply9v.pdf|Datasheet]]</td>
<td>[[Media:powersupply9v.pdf|Datasheet]]</td>
Line 33: Line 36:


<tr>
<tr>
<td>[[Image:nu32v2_3to1outlet.jpg|thumb|200px|picture of 3 to 1 power outlet.|center]]</td>
<td>[[Image:nu32v2_3to1outlet.jpg|thumb|200px|3 3 pin to 2 pin Power Outlet|center]]</td>
<td>1 to 3 power outlet, 2 prong to 3 prong</td>
<td>1 to 3 power outlet, 2 prong to 3 prong outlet</td>
<td>Powtech PT-7803GG</td>
<td>Powtech PT-7803GG</td>
</tr>
</tr>


<tr>
<tr>
<td>[[Image:nu32v2_wirestrippers.jpg|thumb|200px|picture of wirestrippers.|center]]</td>
<td>[[Image:nu32v2_wirestrippers.jpg|thumb|200px|Wirestrippers|center]]</td>
<td>Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. '''Do not try to cut anything else with these, they will get dull''' </td>
<td>Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. '''Do not try to cut anything else with these, they will get dull''' </td>
<td>[http://www.sparkfun.com/products/8696 Sparkfun wire strippers]</td>
<td>[http://www.sparkfun.com/products/8696 Sparkfun wire strippers]</td>
Line 45: Line 48:


<tr>
<tr>
<td>[[Image:nu32v2_wire.jpg|thumb|200px|picture of wire.|center]]</td>
<td>[[Image:nu32v2_wire.jpg|thumb|200px|Wire|center]]</td>
<td>6 colors of 6" sections of 22 AWG solid core wire (Red, white, yellow, green, black, blue)</td>
<td>6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue)</td>
<td>no link</td>
<td>no link</td>
</tr>
</tr>


<tr>
<tr>
<td>[[Image:nu32v2_nokia5110.jpg|thumb|200px|picture of Nokia 5110 LCD.|center]]</td>
<td>[[Image:nu32v2_nokia5110.jpg|thumb|200px|Nokia 5110 LCD|center]]</td>
<td>Monochrome Nokia LCD, 84x48 pixels, SPI communication</td>
<td>Monochrome Nokia LCD, 84x48 pixels, using SPI communication</td>
<td>[http://www.sparkfun.com/products/10168 Nokia 5110], [[Media:nokia5110.pdf|Datasheet]]</td>
<td>[http://www.sparkfun.com/products/10168 Nokia 5110], [[Media:nokia5110.pdf|Datasheet]], [[NU32v2: Nokia 5110 LCD]]</td>
</tr>
</tr>


<tr>
<tr>
<td>[[Image:nu32v2_multimeter.jpg|thumb|200px|picture of multimeter.|center]]</td>
<td>[[Image:nu32v2_multimeter.jpg|thumb|200px|DVM810 Multimeter|center]]</td>
<td>Small multimeter, Velleman DVM810. '''Does not have automatic shutoff. Battery will not last more than 12 hours if left on.'''</td>
<td>Small multimeter, Velleman DVM810. '''Does not have automatic shutoff. Battery will not last more than 12 hours if left on.'''</td>
<td>[http://www.kiesub.com/prostores/servlet/-strse-877/DIGITAL-DVM810-METER-MULTIMETER/Detail Multimeter], [[Media:DVM810.pdf|Datasheet]]</td>
<td>[http://www.kiesub.com/prostores/servlet/-strse-877/DIGITAL-DVM810-METER-MULTIMETER/Detail Multimeter], [[Media:DVM810.pdf|Datasheet]]</td>
Line 63: Line 66:


<tr>
<tr>
<td>[[Image:nu32v2_ledarray.jpg|thumb|200px|picture of led array.|center]]</td>
<td>[[Image:nu32v2_ledarray.jpg|thumb|200px|LED array|center]]</td>
<td>10 LED array, green.</td>
<td>10 LED array, green.</td>
<td>[[Media:ledarray.pdf|Datasheet]]</td>
<td>[[Media:ledarray.pdf|Datasheet]]</td>
Line 69: Line 72:


<tr>
<tr>
<td>[[Image:nu32v2_breadboard.jpg|thumb|200px|picture of extra breadboard.|center]]</td>
<td>[[Image:nu32v2_resistorarray.jpg|thumb|200px|Resistor array|center]]</td>
⚫
<td>10 pin, 9 resistor, 330 Ohm common cathode bus. Dot indicates common pin. For use with the LED array.</td>
⚫
<td>Extra breadboard, 830 tie points</td>
⚫
<td>[[Media:resistorarray330ohm.pdf|Datasheet]]</td>
⚫
<td>[http://www.mpja.com/prodinfo.asp?number=4443+TE 830 T/P Breadboard]</td>
</tr>
</tr>


<tr>
<tr>
<td>[[Image:nu32v2_resistorarray.jpg|thumb|200px|picture of resistor array.|center]]</td>
<td>[[Image:nu32v2_breadboard.jpg|thumb|200px|Extra Breadboard|center]]</td>
⚫
<td>Extra breadboard, 830 tie points.</td>
⚫
<td>9 pin, 8 resistor 330 Ohm common cathode bus. Dot indicates common pin</td>
⚫
<td>[http://www.mpja.com/prodinfo.asp?number=4443+TE 830 T/P Breadboard]</td>
⚫
<td>[[Media:resistorarray330ohm.pdf|Datasheet]]</td>
</tr>
</tr>


<tr>
<tr>
<td>[[Image:nu32v2_pushbutton.jpg|thumb|200px|picture of pushbutton.|center]]</td>
<td>[[Image:nu32v2_pushbutton.jpg|thumb|200px|Pushbutton|center]]</td>
<td>Momentary NO pushbutton</td>
<td>Momentary NO pushbutton.</td>
<td>[[Media:pushbutton.pdf|Datasheet]]</td>
<td>[[Media:pushbutton.pdf|Datasheet]]</td>
</tr>

<tr>
<td>Resistors</td>
<td>A few of the following 1/4W resistors: 100k ohm, 10k ohm, 330 ohm, 100 ohm</td>
⚫
<td>no link</td>
</tr>

<tr>
<td>Capacitors</td>
<td>A few of the following capacitors: 0.01uF, </td>
<td>no link</td>
</tr>

<tr>
<td>Potentiometers</td>
<td>A few of the following 1/4W potentiometers: 10k ohm, </td>
<td>no link</td>
</tr>

<tr>
<td>LEDs</td>
<td>Red super bright 5mm LED </td>
<td>no link</td>
</tr>

<tr>
<td>Phototransistors</td>
<td>SFH 310 visible spectrum phototransistor </td>
<td>[[Media:Phototransistor_visible_310_2_3.pdf|Datasheet]]</td>
</tr>
</tr>


Latest revision as of 05:29, 16 January 2016

THIS PAGE REFERS TO A PRE-RELEASE VERSION OF THE NU32 PIC32 DEVELOPMENT BOARD. FOR INFORMATION, SAMPLE CODE, AND VIDEOS RELATED TO THE PRODUCTION VERSION (2016 AND LATER), AND TO THE CORRESPONDING BOOK "EMBEDDED COMPUTING AND MECHATRONICS WITH THE PIC32 MICROCONTROLLER," VISIT THE NU32 PAGE.


The NU32v2 kit.

The NU32v2 kit contains everything necessary to begin programming the NU32v2 board. Check to make sure your bag contains all of the items listed below.


Components in the kit:


Picture Description Link
The NU32v2
 NU32v2 in 2 breadboards with a switch between GND and the G6 pin NU32v2: Software to Install, NU32v2: Starting a New Project and Putting it on the NU32v2
USB Cable
 1 m USB cable, A male to mini B male Datasheet
9V Power Supply
 9V wall power supply, 0.66A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model EPS090066-P5P from CUI Inc. Datasheet
3 3 pin to 2 pin Power Outlet
 1 to 3 power outlet, 2 prong to 3 prong outlet Powtech PT-7803GG
Wirestrippers
 Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. Do not try to cut anything else with these, they will get dull Sparkfun wire strippers
Wire
 6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue) no link
Nokia 5110 LCD
 Monochrome Nokia LCD, 84x48 pixels, using SPI communication Nokia 5110, Datasheet, NU32v2: Nokia 5110 LCD
DVM810 Multimeter
 Small multimeter, Velleman DVM810. Does not have automatic shutoff. Battery will not last more than 12 hours if left on. Multimeter, Datasheet
LED array
 10 LED array, green. Datasheet
Resistor array
 10 pin, 9 resistor, 330 Ohm common cathode bus. Dot indicates common pin. For use with the LED array. Datasheet
Extra Breadboard
 Extra breadboard, 830 tie points. 830 T/P Breadboard
Pushbutton
 Momentary NO pushbutton. Datasheet
Resistors A few of the following 1/4W resistors: 100k ohm, 10k ohm, 330 ohm, 100 ohm no link
Capacitors A few of the following capacitors: 0.01uF, no link
Potentiometers A few of the following 1/4W potentiometers: 10k ohm, no link
LEDs Red super bright 5mm LED no link
Phototransistors SFH 310 visible spectrum phototransistor Datasheet
Retrieved from "https://hades.mech.northwestern.edu//index.php?title=NU32v2:_What_is_in_the_NU32v2_Kit&oldid=23719"