NU32: What is in the NU32 Kit
From Mech
Revision as of 12:19, 21 December 2011 by NickMarchuk (talk | contribs) (New page: thumb|500px|The NU32v2 kit.|center The NU32 kit contains everything necessary to begin programming the NU32 board. Check to make sure your bag contains all of...)
The NU32 kit contains everything necessary to begin programming the NU32 board. Check to make sure your bag contains all of the items listed below.
Components in the kit:
| Picture | Description | Link |
|---|---|---|
| NU32 in 2 breadboards | NU32: Software to Install, NU32: Starting a New Project and Putting it on the NU32 | |
| 1 m USB cable, A male to mini B male | Datasheet | |
| 6V wall power supply, 1A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model xxx from CUI Inc. | Datasheet | |
| 1 to 3 power outlet, 2 prong to 3 prong outlet | Powtech PT-7803GG | |
| Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. Do not try to cut anything else with these, they will get dull | Sparkfun wire strippers | |
| 6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue) | no link | |
| LCD, 16x2, using xxx communication | Nokia 5110, Datasheet, NU32v2: Nokia 5110 LCD | |
| Small multimeter, xxx. | Multimeter, Datasheet | |
| 10 LED array, green. | Datasheet | |
| 10 pin, 9 resistor, 330 Ohm common cathode bus. Dot indicates common pin. For use with the LED array. | Datasheet | |
| Extra breadboard, 830 tie points. | 830 T/P Breadboard | |
| Momentary NO pushbutton. | Datasheet | |
| Resistors | A few of the following 1/4W resistors: 100k ohm, 10k ohm, 330 ohm, 100 ohm | no link |
| Capacitors | A few of the following capacitors: 0.01uF, | no link |
| Potentiometers | A few of the following 1/4W potentiometers: 10k ohm, | no link |
| LEDs | Red super bright 5mm LED | no link |
| Phototransistors | SFH 310 visible spectrum phototransistor | Datasheet |
