Difference between revisions of "NI-DAQ Cards on Linux"
JamesYeung (talk | contribs) |
|||
| Line 105: | Line 105: | ||
1 = 12.3us-21.5us (typically 12.6us)<br> |
1 = 12.3us-21.5us (typically 12.6us)<br> |
||
8 = 13.1us-24.0us (typically 13.1us)<br> |
8 = 13.1us-24.0us (typically 13.1us)<br> |
||
<br> |
|||
===Encoder=== |
|||
Time it takes to read x encoder inputs.<br> |
|||
1 = 14.2us-27.6us (typically 14.5us)<br> |
|||
<br> |
<br> |
||
Revision as of 13:23, 15 June 2010
Overview
Project by: James Yeung, Master in Electrical and Computer Engineering, 2010.
Last updated: June 11, 2010
The goal of this project was to get the National Instruments Data Acquisition Cards to work on Linux. More specifically, the two cards that will be documented here are:
- NI PCI-6220 16-Bit, 250 kS/s, 16 Analog Inputs
- NI PCI-6713 12-Bit, 1 MS/s per Channel Analog Output Board
This wiki document assumes that you have real-time patched SUSE 11.0 operating system installed. You can follow the guide here.
Installing Drivers and C-API
The supporting software is all available on the National Instruments website. The specific package that we will need is NI-DAQmx 8.0.1. This package contains the drivers, C-API library, documentation on the library functions and example code.
Instructions
- Download the NI-DAQmx 8.0.1 here
- The file that you download is an ISO, or an image of a disk. You could burn it on a CD and run it from a physical disk, but we will be mounting the ISO virtually.
- Install necessary supporting packages.
- Open a terminal window. GNOME Terminal would do.
- Use zypper to install the packages. >> zypper in kernel-source-rt kernel-syms-rt
- Configure SUSE to startup in 4G memory mode.
- This is not necessary if your system is 32-bit.
- Go to the grub folder. >> cd /boot/grub
- Add "set mem=4096" to the entry. >> vi menu.lst
- Find the entry that you normally boot into and add "mem=4096M" to the end of the line that starts with "kernel".
- Restart the computer with 4G memory mode.
- Install NI-DAQmx >> cd ~/Downloads/ >> tar >> cd nidaqmx801 >> mkdir /mnt/daqmx >> mount -t iso9660 -o loop nidaqmx801.iso /mnt/daqmx >> cp /mnt/daqmx/disk . >> cd disk >> sudo ./INSTALL
- Follow the prompts to install.
- Restart the computer.
- Open terminal and type >> nilsdev
- You should be able to see information about the NI-DAQ cards.
Configuration Guide
There is a configuration guide (ConfigurationGuide.html) included in the drivers that you downloaded from step 1. For example, you can configure the name of the card from dev0 to something more descriptive like AnalogIn. This name will also affect how you program later on.
Datasheets
Timing Data
Here are some experimental timing data.
Analog
Time it takes to read x analog inputs.
2 = 27.6-42.5us (typically 28.8us)
3 = 41.9-55.3us (typically 43.6us)
4 = 55.9-72.9us (typically 57.8us)
5 = 69.8-86.3us (typically 72.6us)
6 = 84.3-100.5us (typically 87.1us)
7 = 98.0-124.0us (typically ~101us)
8 = 112.0-130.4us (typically ~115us)
Time it takes to write x analog outputs.
2 = 12.8-23.2us (typically 13.1us)
3 = 13.1-23.2us (typically 13.1us)
4 = 13.4-23.8us (typically 13.7us)
5 = 15.1-26.0us (typically 15.4us)
6 = 15.9-27.9us (typically 16.2us)
7 = 17.6-29.9us (typically 17.9us)
8 = 19.0-32.1us (typically 19.5us)
Digital
Time it takes to read x digital inputs.
1 = 12.0us-22.3us (typically 12.0us)
8 = 12.6us-24.9us (typically 12.6us)
Time it takes to write x digital outputs.
1 = 12.3us-21.5us (typically 12.6us)
8 = 13.1us-24.0us (typically 13.1us)
Encoder
Time it takes to read x encoder inputs.
1 = 14.2us-27.6us (typically 14.5us)
Example Code
To compile: gcc main.c -o main -lnidaqmx
How to Read Analog Inputs
#include <stdio.h>
#include <NIDAQmx.h>
#include <time.h>
#define DAQmxErrChk(functionCall) if( DAQmxFailed(error=(functionCall)) ) goto Error; else
int main(void){
int32 error=0;
TaskHandle taskHandle=0;
int32 read;
float64 data;
char errBuff[2048]={'\0'};
int ii;
/*********************************************/
// DAQmx Configure Code
/*********************************************/
DAQmxErrChk(DAQmxCreateTask("Task",&taskHandle));
DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"AnalogIn/ai0","ChannelName",DAQmx_Val_RSE,-10.0,10.0,DAQmx_Val_Volts,NULL));
// To read more analog inputs, simply add more channels to the task.
/*********************************************/
// DAQmx Start Code
/*********************************************/
DAQmxErrChk(DAQmxStartTask(taskHandle));
/*********************************************/
// DAQmx Read Code
/*********************************************/
for(ii = 0; ii < 2000; ii++){
DAQmxErrChk(DAQmxReadAnalogF64(taskHandle,1,10.0,DAQmx_Val_GroupByChannel,&data,1,&read,NULL));
printf("%4d\t%f\n", ii, data);
}
Error:
if( DAQmxFailed(error) )
DAQmxGetExtendedErrorInfo(errBuff,2048);
if( taskHandle!=0 ) {
/*********************************************/
// DAQmx Stop Code
/*********************************************/
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
}
if( DAQmxFailed(error) )
printf("DAQmx Error: %s\n",errBuff);
printf("End of program, press Enter key to quit\n");
getchar();
return 0;
}
How to Read Digital Inputs
#include <stdio.h>
#include <NIDAQmx.h>
#include <time.h>
#define DAQmxErrChk(functionCall) if( DAQmxFailed(error=(functionCall)) ) goto Error; else
int main(void){
int32 error=0;
TaskHandle taskHandle=0;
int32 read;
int32 readBytePerSamp;
int8 data;
char errBuff[2048]={'\0'};
int ii;
/*********************************************/
// DAQmx Configure Code
/*********************************************/
DAQmxErrChk(DAQmxCreateTask("Task",&taskHandle));
DAQmxErrChk(DAQmxCreateDIChan(taskHandle,"AnalogIn/port0/line0","",DAQmx_Val_ChanPerLine));
// Use the line below to add multiple lines from the same port
// DAQmxErrChk(DAQmxCreateDIChan(taskHandle,"AnalogIn/port0/line0:7","",DAQmx_Val_ChanPerLine));
/*********************************************/
// DAQmx Start Code
/*********************************************/
DAQmxErrChk(DAQmxStartTask(taskHandle));
/*********************************************/
// DAQmx Read Code
/*********************************************/
for(ii = 0; ii < 2000; ii++){
DAQmxErrChk(DAQmxReadDigitalLines(taskHandle,1,10.0,DAQmx_Val_GroupByScanNumber,&data,1,&read,&readBytePerSamp,NULL));
printf("%4d\t%d\n", ii, data);
}
Error:
if( DAQmxFailed(error) )
DAQmxGetExtendedErrorInfo(errBuff,2048);
if( taskHandle!=0 ) {
/*********************************************/
// DAQmx Stop Code
/*********************************************/
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
}
if( DAQmxFailed(error) )
printf("DAQmx Error: %s\n",errBuff);
printf("End of program, press Enter key to quit\n");
getchar();
return 0;
}
How to Write Analog Outputs
#include <stdio.h>
#include <NIDAQmx.h>
#include <time.h>
#define DAQmxErrChk(functionCall) if( DAQmxFailed(error=(functionCall)) ) goto Error; else
int main(void){
int32 error=0;
TaskHandle taskHandle=0;
int32 written;
float64 data;
char errBuff[2048]={'\0'};
int ii;
/*********************************************/
// DAQmx Configure Code
/*********************************************/
DAQmxErrChk(DAQmxCreateTask("Task",&taskHandle));
DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"AnalogOut/ai0","ChannelName",DAQmx_Val_RSE,-10.0,10.0,DAQmx_Val_Volts,NULL));
// To write more analog outputs, simply add more channels to the task.
/*********************************************/
// DAQmx Start Code
/*********************************************/
DAQmxErrChk(DAQmxStartTask(taskHandle));
/*********************************************/
// DAQmx Read Code
/*********************************************/
for(ii = 0; ii < 2000; ii++){
data = ii % 10;
DAQmxErrChk(DAQmxWriteAnalogF64(taskHandle,1,TRUE,10.0,DAQmx_Val_GroupByChannel,&data,&written,NULL));
printf("%4d\t%f\n", ii, data);
}
Error:
if( DAQmxFailed(error) )
DAQmxGetExtendedErrorInfo(errBuff,2048);
if( taskHandle!=0 ) {
/*********************************************/
// DAQmx Stop Code
/*********************************************/
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
}
if( DAQmxFailed(error) )
printf("DAQmx Error: %s\n",errBuff);
printf("End of program, press Enter key to quit\n");
getchar();
return 0;
}
How to Write Digital Outputs
#include <stdio.h>
#include <NIDAQmx.h>
#include <time.h>
#define DAQmxErrChk(functionCall) if( DAQmxFailed(error=(functionCall)) ) goto Error; else
int main(void){
int32 error=0;
TaskHandle taskHandle=0;
int32 written;
int8 data;
char errBuff[2048]={'\0'};
int ii;
/*********************************************/
// DAQmx Configure Code
/*********************************************/
DAQmxErrChk(DAQmxCreateTask("Task",&taskHandle));
DAQmxErrChk(DAQmxCreateDOChan(taskHandle,"AnalogIn/port0/line0","",DAQmx_Val_ChanPerLine));
// Use the line below to add multiple lines from the same port
// DAQmxErrChk(DAQmxCreateDOChan(taskHandle,"AnalogIn/port0/line0:7","",DAQmx_Val_ChanPerLine));
/*********************************************/
// DAQmx Start Code
/*********************************************/
DAQmxErrChk(DAQmxStartTask(taskHandle));
/*********************************************/
// DAQmx Read Code
/*********************************************/
for(ii = 0; ii < 2000; ii++){
data = ii % 2;
DAQmxErrChk(DAQmxWriteDigitalLines(taskHandle,1,TRUE,10.0,DAQmx_Val_GroupByScanNumber,&data,&written,NULL));
printf("%4d\t%d\n", ii, data);
}
Error:
if( DAQmxFailed(error) )
DAQmxGetExtendedErrorInfo(errBuff,2048);
if( taskHandle!=0 ) {
/*********************************************/
// DAQmx Stop Code
/*********************************************/
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
}
if( DAQmxFailed(error) )
printf("DAQmx Error: %s\n",errBuff);
printf("End of program, press Enter key to quit\n");
getchar();
return 0;
}
Others
More example code can be found in the directory "/usr/local/natinst/nidaqmx/examples/".
Full documentation on the nidaqmx API can be found at "/usr/local/natinst/nidaqmx/docs/daqmxcfunc.chm/_main.html"
