Difference between revisions of "Attaching to a shaft"

Revision as of 11:56, 14 February 2009

There are many ways to attach to a shaft (e.g., a motor shaft). Below are a few examples.

Press fit or interference fit (note: be careful not to apply press forces large enough to damage the motor)
Set screws
Split clamp

@@ Line 1: / Line 1: @@
 There are many ways to attach to a shaft (e.g., a motor shaft).  Below are a few examples.
-* [http://www.eminebea.com/content/html/en/engineering/bearings/fitting.shtml Press fit or interference fit] (note:  be careful not to apply press forces large enough to break the motor)
+* [http://www.eminebea.com/content/html/en/engineering/bearings/fitting.shtml Press fit or interference fit] (note:  be careful not to apply press forces large enough to damage the motor)
 * [http://en.wikipedia.org/wiki/Set_screw Set screws]
 * Split clamp [[Image:split-clamp.gif]]