Northwestern Design Competition

DC2016

• Winter Kickoff Meeting 1/8/2016, 6-8pm, in Tech M152
  • Review the Competition Rules
  • Teambuilding exercise
  • Pizza!

• Milestone 1 Wed, 1/20/2016, 6pm in Ford B100
  • CAD
    • You can use NX, Solidworks (installed on the computers in B100), or sign up for OnShape, a free, browser based CAD program.
    • I'll assume you are using OnShape, since there is no installation necessary. Check out their online tutorial videos:
      • Definitely watch the first 12 videos on the OnShape Tutorials page
      • You may also want to watch OnShape Intro to CAD
      • and OnShape Essential Training
      • Use a real mouse, with scroll wheel. You can get by using your laptop trackpad, but a mouse makes things so much easier.
  • Assignment: Design a mount for an N20 size gear motor (example: Pololu gearmotor mount)
    • If you want to follow along, you can watch how I would do it here

• Milestone 2 Wed, 1/27/2016, 6pm in Ford B100
  • 3D printing
    • Save your CAD model as a .stl file, and print it on one of the three Monoprice 3D printers in B100 using Simplify3D.
  • Assignment: Design and print something. Measure the print with calipers and note how much the size differs from your digital model.

• Workshop 3 TBD
  • Laser cutting

• Workshop 4 TBD
  • Arduino coding

• Workshop 5 TBD
  • Motors, motor drivers, batteries

• Workshop 6 TBD
  • Sensors

DC2015

Winter 2015 Schedule

• Winter Kickoff Workshop 1 - 2/24/15, 6-8pm in Ford B100
  • Build a DC2015 Control Board: the blue board!
    • How to solder
    • The brains of the operation
    • Building the blue board
    • Programming the blue board
    • Useful code for the blue board

• Workshop 2 - 3/3/15, 6-8pm in Ford B100
  • Build a DC2015 Expansion board: the black board!
    • Making things move with the black board
    • Building the black board
    • Something about attaching to motors

• Workshop 3 - 3/10/15, 6-8pm in Ford B100
  • Build a DC2015 Protoboard: the green board!
    • Prototyping circuits
    • Buttons, pots and light sensors
    • Sensing retroreflective blocks
    • Building the green board

Fall 2014 Schedule

• NU Robotics Workshop 1 - Soldering - 10/22/14 in Ford B100
  • Learn how to solder

• DC Kickoff - Around 11/5/14

DC2014

Winter 2014 Schedule

• Kickoff - 1/15/14, 5pm in Tech A110

• Sponsor Talk - MISUMI
  • Tue, 1/28/2014, 5pm, Tech M128
  • Designing with MISUMI

• Workshop 1 - Robot simulation
  • Thur, 1/30/2014, 5pm, Ford B100
  • Using a simulator to test robot algorithms

• Milestone 1 - Maze solving robot
  • Due by Wed, 2/5/2014
  • Show off your robot code solving a maze
  • Workshop1 Assignment
  • Workshop1 Files

• Workshop 2 - Makerbot and advanced robot simulation
  • Thur, 2/6/2014, 5pm, Ford B100
  • Using CAD and the Makerbot
  • Better dead reckoning in simulation

• Workshop 3 - Makerbot linkages and advanced robot simulation
  • Thur, 2/13/2014, 5pm, Ford B100
  • Designing 4-bar linkages and printing them on the Makerbot
  • Radar and LIDAR in simulation

• Milestone 2 and 3 - Maze solving robot and 3D printed motor mount
  • Due by Wed, 3/5/2014
  • Design, print and assemble a simple mechanism with the Makerbot
  • Use sensors for wall-following
  • Workshop2 Assignment
  • Workshop2 Files
  • Design, print and assemble a 4-bar linkage with the Makerbot
  • Use LIDAR for maze solving
  • Workshop3 Assignment
  • Workshop3 Files

• Competition Format
  • 3 competitions: Competition Format
  • Milestone 4 Due Monday, 4/14/14, by email to Nick
    • Rough mechanical design of your robot. Sketches of legs and drive mechanism, description of mechanism, material list (motors, servo, bearings, etc.)

• Workshop 5 - Roland mill PCBs
  • Wed, 4/23/2014, 4pm, Ford B100
  • Designing printed circuit boards to be milled on the Roland CNC desktop mill

• Milestone 5 - Robot PCB
  • Due by Fri, 4/25/2014
  • Design, mill, solder and program a PIC32MX150 PCB for your robot
  • Workshop5 Files

• Milestone 6 - Robot PCB
  • Instructions on using the PCB mill (beta) :
    • Workshop6.pdf
  • Sample code for a simple line following robot using 2 DC drive motors, 3 analog inputs from IR line sensors, output to the Nokia LCD. Also included, sample code for the IR proximity range finder for the NU32, and an .stl for a range finder cap to block light from the LED hitting the sensor.
    • Workshop6 Files
    • IR wall stl file

DC2013

Spring Quarter Schedule

• Workshop 6 - H-Bridges, DC motor control, wheel sensing
  • Wed, 4/3/2013, 6pm in mechatronics lab
  • workshop6.c - drive a DC motor using PWM with an h-bridge and sense its position with a reflectance sensor
  • How to use an h-bridge and a DC motor
  • Encoder template

• Milestone 6 - Wheel control
  • Meeting in the mechatronics lab at 6pm 4/17
  • Demo due by 4/17/2013
  • Press the USER button, and the wheel rotates 180 degrees

• Milestone 7 - Complete chassis
  • How to design parts that can be 3D printed
  • Demo due by 4/24/2013
  • Demo your chassis

• Milestone 8 - Driving and sensing the world
  • Demo due by 5/1/2013
  • Demo your robot driving around the arena and sensing things

• Milestone 9 - Identify prey and drive towards them
  • Demo due by 5/8/2013
  • Demo your robot chasing Prey

• Milestone 10 - Operational robot, demo for E-Week
  • Demo due by 5/15/2013, demo at E-Week in Tech lobby
  • Show how your robot works

• COMPETITION!!!!
  • 5/18/2013, Noon in the machine shop

Useful things:

• Arena and breakout board
  • Breakout board EAGLE files

• • DC2013arena.pdf
• Write-ups
  • DC2013milestone2.pdf
  • DC2013milestone3.pdf
  • How to design parts that can be made on the laser cutter
  • workshop5.dxf - parts that mount the laser, sensors and servo for reference
  • How to use an h-bridge and a DC motor
  • How to design parts that can be 3D printed
• Code
  • NU32.c, NU32.h, NU32bootloaded.ld
  • DC2013_Milestone2.c
  • DC2013_milestone3.c
  • workshop5.c - sweep the servo when the user button is pressed, save the data to an array
  • workshop6.c - drive a DC motor using PWM with an h-bridge and sense its position with a reflectance sensor

• NU32
  • Download: MPLAB X IDE and MPLAB XC32 Compiler from http://www.microchip.com/pagehandler/en-us/family/mplabx/#downloads
  • Download: FTDI Drivers from http://www.ftdichip.com/Drivers/VCP.htm
  • Download: NU32_Utility from NU32:_Software_to_Install
• NU32 from 2012
  • We have a lot of left over boards from 2012 but you have to use NU32_Utility_v5 from NU32:_Software_to_Install
  • and NU32_2012.c, NU32_2012.h instead of NU32.c and NU32.h

Winter 2013 Schedule

• Workshop 1 - Prey robot deconstruction
  • Tue, 1/15/2013, 6pm, Ford B100

• Milestone 1 - Prey robot -> Demobot
  • Due by Wed, 1/23/2013
  • Show off your Demobot, made from a deconstructed Prey robot DONE!

• Workshop 2 - Programming the PIC32
  • Begin Wed, 1/23/2013, meeting in the Mechatronics lab at 6pm
  • How to program the PIC32 on the NU32
  • Sample code - NU32test.hex, SimplePIC.c, NU32bootloaded.ld, talkingPIC.c, NU32.c, NU32.h

• Milestone 2 - Programming the PIC32
  • Due by Wed, 1/30/2013
  • Code Template: DC2013_Milestone2.c, NU32.c, NU32.h, NU32bootloaded.ld
  • Complete the assignment here: DC2013milestone2.pdf DONE!

• Workshop 3 - Programming the PIC32
  • Begin Wed, 1/30/2013, meeting in the Mechatronics lab at 6pm
  • How to program the PIC32 on the NU32, sensors and actuators, soldering
  • Sample code - DC2013_milestone3.c

• Milestone 3 - Programming the PIC32, sensors and actuators
  • Due by Wed, 2/6/2013
  • Potentiometers, phototransistors, RC servos, ultrasonic distance sensors
  • Complete the assignment here: DC2013milestone3.pdf DONE!

• Workshop 4 - Using the laser cutter
  • Begin Wed, 2/6/2013
  • How to design parts that can be made on the laser cutter

• Milestone 4 - Laser cutter training
  • Due By Wed, 2/20/2013
  • Get trained on the laser cutter
  • Design and build a robot gripper or mechanism DONE!

• Workshop 5 - RC servo and Laser detection
  • Begin Wed, 2/13/2013, at 6pm in the mechatronics lab
  • How to use a laser to detect retroreflective tape
  • How to buffer and analyse data
  • Combining the laser and RC servo to make a moving sensor
  • workshop5.dxf - parts that mount the laser, sensors and servo for reference
  • workshop5.c - sweep the servo when the user button is pressed, save the data to an array

• Milestone 5 - Target hunting
  • Due by Wed, 2/20/2013
  • Mount the laser on the servo
  • Sweep the laser, find the target, and point at it DONE!

Reading week 6/11-5, finals week 6/18-22, break 3/25-29

DC2012

Scale arena:

Dimensions of the arena for 2012

Equipment

• NU32, USB cable, 6V power supply
• 2 drive motors, 2 motor mounts, 2 wheels
• large and small RC servos
• red and IR lasers
• 12"x24"x0.118" clear acrylic sheets
• AA batteries and packs

PCB

The PCB breakout for DC2012

Schematic of PCB for 2012

Use the straight cut sheet metal cutter to slice up the PCB

Like this

So that you separate all the boards

Use female header pins to attach the NU32. The headers come is sets of 20 pins, so you will have to cut one up.

Attach lasers with hot glue

Note the orientation of the LED an phototransistor, they are polarized!

Workshop 1, Wednesday 1/18 5:30-7pm Tech L221, makeup Thursday 1/19 9-11am Mechatronics Lab

• How to program in MPLABX
• How to use the bootloader to put code on the NU32
• Digital output I/O (read a button and flash an LED)
• Analog input
• PWM output
• Sample code: Sample code for Workshop 1

Milestone 1, due by 1/27

• If a pushbutton is pressed, read the value of a potentiometer and change the brightness of an LED to the corresponding value with PWM

Workshop 2, Thursday 2/9 6-7pm Tech L221, makeup Friday 2/10 9-11am Mechatronics Lab

• Optical isolation for motors and RC servos
• Powering a motor with an h-bridge
• Writing to the 16x2 character LCD
• Laser detection of retroreflective tape / Optical line detection
• 2 1/2D design

Milestone 2, Due week of Feb 27

• Optically isolate a motor
• Read a potentiometer and write its voltage to the LCD
• Control the motor velocity based on the potentiometer reading
• Control an RC servo
• Detect a 3/4" wide black line on white paper with a phototransistor and LED

Laser cutting Workshop, Week of Apr 2

• Laser cutting
• 2.5D design
• Making a chassis, mounting motors and sensors

Chassis Milestone, Due Apr 13

• Demonstrate a robot chassis that can drive around the arena, bonus points for following a line, detecting and moving towards the moving goals, and detecting and moving towards a crate

Midterm Milestone, Due Apr 30 / May 1 / May 2

• Demonstrate some strategy - from the starting position, go get a crate and bring to back towards the goal

Pre-competition Milestone, Due May 9

• Demonstrate some advanced strategy - score several points

Competition May 19!

DC2011

Milestone 1

• On a button press, read the value of a potentiometer and change the brightness of an LED accordingly using PWM. Note: Do not use an h-bridge or motor as previously assigned.
• Due before Workshop 2 on Wed, 2/9.
• Sample code from Workshop 1

Milestone 2

• Due before Workshop 3 on Wed, 2/23.
• Goals:
  • Use code from NU32v2: Nokia 5110 LCD and NU32v2: Analog Input to read a potentiometer and print the voltage to the Nokia 5110
  • Optically isolate a motor and control its velocity based on the potentiometer reading
  • Do 1 of the following:
    • Mount a phototransistor to a laser and detect a cake OR
    • Detect a line of electrical tape on white paper with an optoreflector
• Datasheets
  • HBridge_L293D.pdf - H-bridge for driving a DC motor
  • Optocoupler_A847.pdf - Optocoupler to optically isolate your H-bridge
  • HexInverter_74HC04.pdf - Inverting chip to digitize optocoupler output
  • Optoreflector_OPB740.pdf - Optoreflector to detect lines or color
  • Optoreflector_QRE1113.pdf - Optoreflector to detect lines or color
  • Phototransistor_SFH310.pdf - Phototransistor to detect lines, color, or laser reflections
• Notes
  • DC2011_WS2_OpticalIsolation.pdf - How to optically isolate an h-bridge and servo motor using the A847 and 74HC04
  • DC2011_WS2_OpticalSensors.pdf - How to use the SFH310 to detect a cake and use the OPB740 or QRE1113 for line following
  • DC2011_WS2_Code.zip - Example code for the NU32v2 that will:
    • Control a DC motor hooked up to an optically isolated h-bridge, and control an optically isolated RC servo motor
    • Respond to serial commands to control the motors, write to the Nokia 5110, and read two analog signals

Milestone 4

• Due before Wed, 3/16
• Finish laser training, at least one person per team
• Construct a prototype chassis for your robot
• Do one of the following:
  • Follow part of the line on the 36" x 96" printout of this pdf
  • Detect a cake somewhere on the floor and drive to it

Breakout Boards

• Image of the breakout boards
• Circuit schematic of the breakout boards
• This board contains:
  • A spot to plug in the NU32v2 with some prototyping area
  • The optical isolation circuit with some prototyping area, the same size as the NU32v2 breakout board so it can be stacked on top
  • 8 SFH310 with LED breakout boards
  • 4 SFH310 with laser diode breakout boards
  • 1 LIS352AX accelerometer breakout board
  • 1 LSM303DHL tilt-compensated compass breakout board
  • 1 LPY550AL gyroscope breakout board
  • 1 LS7366R encoder decoder breakout board
  • 1 TCS3103 color sensor breakout board
• How to use the boards:
  • 

    Solder female header pins to the NU32v2 Breakout Board so that you can plug in and remove your NU32v2
  • 

    Solder sockets to the Optically Isolated Motor Board so you can remove burnt out chips
  • 

    The LED and Laser Phototransistor breakout boards will make it easier to attach wires to the sensors
  • 

    You can stack the NU32v2 breakout board with the Optically Isolated board

Brochure for 2011

• Brochure for 2011

Previous Years

Wiki pages on sensors, actuators, programming, and microcontrollers: use pages below

• Parts in the DC2008 quick start pack
• PIC C intro slides, as presented 2008/01/24 (pdf)
• PIC interfacing slides, as presented 2008/01/28 (pdf)
• Link to all sample PIC code here.

Sensors and actuators for DC

• Solderless Breadboard & wiring that works
• Using LEDs & IREDs
• Using a laser
• Infrared reflectivity
  • Using phototransistors
  • Sensing optical tape
• Comparators : the analog digital interface
• Faulhaber MiniMotor SA gearmotor with encoder, as well as the local wiki page
• Adding a magnetic encoder to a GM3 Gearmotor
  • Using magnetic switches (Hall Effect)
• Driving high-current devices: several options
• Driving a Stepper Motor
• Driving an RC Servo
• Accelerometers
• Strain gauges
• Basic Stamp Microcontroller Not recommended for DC2008
• NiMH rechargable batteries and chargers