NU32v2: What is in the NU32v2 Kit

The NU32v2 kit.

The NU32v2 kit contains everything necessary to begin programming the NU32v2 board. Check to make sure your bag contains all of the items listed below.

Components in the kit:

Picture	Description	Link
The NU32v2	NU32v2 in 2 breadboards with a switch between GND and the G6 pin	NU32v2: Software to Install, NU32v2: Starting a New Project and Putting it on the NU32v2
USB Cable	1 m USB cable, A male to mini B male	Datasheet
9V Power Supply	9V wall power supply, 0.66A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model EPS090066-P5P from CUI Inc.	Datasheet
3 3 pin to 2 pin Power Outlet	1 to 3 power outlet, 2 prong to 3 prong outlet	Powtech PT-7803GG
Wirestrippers	Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. Do not try to cut anything else with these, they will get dull	Sparkfun wire strippers
Wire	6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue)	no link
Nokia 5110 LCD	Monochrome Nokia LCD, 84x48 pixels, using SPI communication	Nokia 5110, Datasheet, NU32v2: Nokia 5110 LCD
DVM810 Multimeter	Small multimeter, Velleman DVM810. Does not have automatic shutoff. Battery will not last more than 12 hours if left on.	Multimeter, Datasheet
LED array	10 LED array, green.	Datasheet
Resistor array	10 pin, 9 resistor, 330 Ohm common cathode bus. Dot indicates common pin. For use with the LED array.	Datasheet
Extra Breadboard	Extra breadboard, 830 tie points.	830 T/P Breadboard
Pushbutton	Momentary NO pushbutton.	Datasheet