All public logs

Combined display of all available logs of Mech. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 22:35, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Fluffbot with Seal Housing.jpg (This picture shows the seal mounted on the Fluffbot)
• 22:14, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Isometric view of Fluffbot guts.jpg
• 14:42, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Dimensioned Drawing of Wheels.pdf (This is a dimensioned drawing of the wheels for the Fluffbot. The diameter of the hole of the bearing should be measured and compared to the outer dimension of the bearing to assure that they are the same size (press fit). The outside of the wheel in this)
• 14:37, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Dimensioned Drawing of Chassis.pdf (This is a dimensioned drawing of the chassis of the Fluffbot. The top most hole is for the bearing and it is sized for a press fit. The main center hole is for the motor shaft. There is also a well that is dimensioned to be drilled down to accommodate the)
• 14:01, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Dimensioned Drawing of Steering Fork.pdf (This is a dimensioned drawing of the front wheel steering fork. The upper shaft of the fork is sized for a press fit into the 1/4" inner diameter bearing, which is press fit on the chassis. The fork is made from 2" Aluminum 6061.)
• 13:54, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Momentum Wheel Dimensioned Drawing.pdf (This is a dimensioned drawing of the momentum wheel. )
• 13:44, 17 March 2010 NoahPentelovitch talk contribs uploaded File:RY NP TJ Wheel with Bearing.jpg (Photo of aluminum wheels with bearings press fit into hole and rubber tires fit on)
• 13:30, 17 March 2010 NoahPentelovitch talk contribs uploaded File:Photo 81.jpg