Difference between revisions of "File:Globe-hex-wrench-inserted.jpg"
From Mech
Jump to navigationJump to searchMatt Turpin (talk | contribs) (Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel.) |
(No difference)
|
Latest revision as of 14:51, 8 July 2008
Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 15:18, 8 July 2008 |  | 1,024 × 730 (105 KB) | Matt Turpin (talk | contribs) | Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel. |
| 15:17, 8 July 2008 |  | 2,304 × 1,728 (261 KB) | Matt Turpin (talk | contribs) | Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel. | |
| 14:51, 8 July 2008 |  | 2,304 × 1,728 (416 KB) | Matt Turpin (talk | contribs) | Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel. |
You cannot overwrite this file.
File usage
The following page uses this file:
