Difference between revisions of "Robot Club"

Latest revision as of 18:54, 3 October 2018

Mu ("Moo") is a nice IDE used to edit the code and debug.

First, plug the board in a open Mu. Load main.py from the CIRCUITPY drive. Open the serial monitor.
Second, go into REPL mode and communicate with the board. Practice entering (CTRL-c) and exiting (CTRL-D) REPL.
Third, make a local copy of main.py, in case you ever want to see the original examples again.
Forth, replace the contents of main.py with the content from this example: Main.txt

@@ Line 1: / Line 1: @@
-Files for the programming tutorial: [[Media:nurobotics_tutorial.zip | nurobotics_tutorial.zip]]
+== Halloween Tutorial 1==
+We are using the [https://www.adafruit.com/product/3727 Itsy Bitsy M0 Express] from [https://www.adafruit.com/ Adafruit].
+[https://codewith.mu/ Mu ("Moo")] is a nice IDE used to edit the code and debug.
+* First, plug the board in a open Mu. Load main.py from the CIRCUITPY drive. Open the serial monitor.
+* Second, go into REPL mode and communicate with the board. Practice entering (CTRL-c) and exiting (CTRL-D) REPL.
+* Third, make a local copy of main.py, in case you ever want to see the original examples again.
+* Forth, replace the contents of main.py with the content from this example: [[Media:Main.txt | Main.txt]]