Difference between revisions of "PC104 Break Out Board"

From Mech
Jump to navigationJump to search
m
m
 
Line 1: Line 1:
The PC/104 Break Out Board is found in all of the mechatronics lab kits. It provides an easy interface to the [[Sensoray 526 Data Aquisition Board]]. Input and output screw terminal blocks allow you to quickly and easily attach wires to the Digital and Analog I/O. Encoder pins allow you to easily plug and unplug a ribbon cable from an encoder. The board also accepts a 12V power supply and converts it to the +5V/<math>\pm</math>12V needed by the PC/104 stack.
The PC/104 Break Out Board is found in all of the mechatronics lab kits. It provides an easy interface to the [[Sensoray 526 Data Aquisition Card]]. Input and output screw terminal blocks allow you to quickly and easily attach wires to the Digital and Analog I/O. Encoder pins allow you to easily plug and unplug a ribbon cable from an encoder. The board also accepts a 12V power supply and converts it to the +5V/<math>\pm</math>12V needed by the PC/104 stack.


[[image:bobtop.jpg|800px]]
[[image:bobtop.jpg|800px]]

Latest revision as of 16:30, 13 June 2006

The PC/104 Break Out Board is found in all of the mechatronics lab kits. It provides an easy interface to the Sensoray 526 Data Aquisition Card. Input and output screw terminal blocks allow you to quickly and easily attach wires to the Digital and Analog I/O. Encoder pins allow you to easily plug and unplug a ribbon cable from an encoder. The board also accepts a 12V power supply and converts it to the +5V/12V needed by the PC/104 stack.

Bobtop.jpg

Bobbot.jpg