Difference between revisions of "Northwestern Design Competition"
From Mech
Jump to navigationJump to searchNickMarchuk (talk | contribs) (→DC2011) |
NickMarchuk (talk | contribs) (→DC2011) |
||
| Line 4: | Line 4: | ||
*Due before Workshop 2 on Wed, 2/9. |
*Due before Workshop 2 on Wed, 2/9. |
||
*[[Media:NU32v2_DC2011.zip | Sample code]] |
*[[Media:NU32v2_DC2011.zip | Sample code]] |
||
'''Milestone 2''' |
'''Milestone 2''' |
||
==Previous Years== |
==Previous Years== |
||
Revision as of 11:12, 1 February 2011
DC2011
Milestone 1
- On a button press, read the value of a potentiometer and change the brightness of an LED accordingly using PWM. 'Note: Do not use an h-bridge or motor as previously assigned.
- Due before Workshop 2 on Wed, 2/9.
- Sample code
Milestone 2
Previous Years
Wiki pages on sensors, actuators, programming, and microcontrollers: use pages below
- Parts in the DC2008 quick start pack
- PIC C intro slides, as presented 2008/01/24 (pdf)
- PIC interfacing slides, as presented 2008/01/28 (pdf)
- Link to all sample PIC code here.
Sensors and actuators for DC
- Solderless Breadboard & wiring that works
- Using LEDs & IREDs
- Using a laser
- Infrared reflectivity
- Using phototransistors
- Sensing optical tape
- Comparators : the analog digital interface
- Faulhaber MiniMotor SA gearmotor with encoder, as well as the local wiki page
- Adding a magnetic encoder to a GM3 Gearmotor
- Using magnetic switches (Hall Effect)
- Driving high-current devices: several options
- Driving a Stepper Motor
- Driving an RC Servo
- Accelerometers
- Strain gauges
- Basic Stamp Microcontroller Not recommended for DC2008
- NiMH rechargable batteries and chargers
Prof. Peshkin's favorite datasheets
