NU32v2: Nokia 5110 LCD

Page Under Construction

NDM 1/10/2011

This page contains code for using the Nokia 5110 from Sparkfun.

Code

/* Use the Sparkfun SPI LCD Nick Marchuk 12/21/2010

from http://www.arduino.cc/playground/Code/PCD8544

/

include <stdlib.h>
include <plib.h>

// Configuration Bit settings // SYSCLK = 80 MHz (8MHz Crystal/ FPLLIDIV * FPLLMUL / FPLLODIV) // PBCLK = 80 MHz // Primary Osc w/PLL (XT+,HS+,EC+PLL) // WDT OFF // Use Dbg Comm channel 2 // Other options are don't care

pragma config FPLLMUL = MUL_20, FPLLIDIV = DIV_2, FPLLODIV = DIV_1, FWDTEN = OFF
pragma config POSCMOD = HS, FNOSC = PRIPLL, FPBDIV = DIV_1
pragma config ICESEL = ICS_PGx2

define GetSystemClock() (80000000ul)
define GetPeripheralClock() (GetSystemClock()/(1 << OSCCONbits.PBDIV))
define SYS_FREQ (80000000L)

/** LED ************************************************************/

define mInitAllLEDs() LATG |= 0x3000; TRISG &= 0xCFFF;

define mLED_1 LATGbits.LATG12
define mLED_2 LATGbits.LATG13

define mGetLED_1() mLED_1
define mGetLED_2() mLED_2

define mLED_1_On() mLED_1 = 0; // low
define mLED_2_On() mLED_2 = 0; // low

define mLED_1_Off() mLED_1 = 1; // high
define mLED_2_Off() mLED_2 = 1; // high

define mLED_1_Toggle() mLED_1 = !mLED_1;
define mLED_2_Toggle() mLED_2 = !mLED_2;

char Out_Buffer[32];

// LCD variables

define mInitLCDPins() LATE |= 0x0000; TRISE &= 0xFFF8;
define mPIN_SCE LATEbits.LATE2 // LCD CS .... Pin 3
define mPIN_RESET LATEbits.LATE1 // LCD RST .... Pin 1
define mPIN_DC LATEbits.LATE0 // LCD Dat/Com. Pin 5
define mSCE_Low() mPIN_SCE = 0; // low
define mSCE_High() mPIN_SCE = 1; // high
define mRESET_Low() mPIN_RESET = 0; // low
define mRESET_High() mPIN_RESET = 1; // high
define mDC_Low() mPIN_DC = 0; // low
define mDC_High() mPIN_DC = 1; // high

//#define PIN_SDIN 4 // LCD SPIDat . Pin 6 //#define PIN_SCLK 3 // LCD SPIClk . Pin 4

                    // LCD Gnd .... Pin 2
                    // LCD Vcc .... Pin 8
                    // LCD Vlcd ... Pin 7

define LCD_C 0
define LCD_D 1
define LCD_X 84
define LCD_Y 48

//#define LCD_CMD 0

// lcd functions void LcdCharacter(char); void LcdClear(void); void LcdInitialise(void); void LcdString(char *); //void LcdString(char *characters) void LcdWrite(char, char); void gotoXY(int, int); void drawLine(void);

static const char ASCII[96][5] = {

{0x00, 0x00, 0x00, 0x00, 0x00} // 20  (space)

,{0x00, 0x00, 0x5f, 0x00, 0x00} // 21 ! ,{0x00, 0x07, 0x00, 0x07, 0x00} // 22 " ,{0x14, 0x7f, 0x14, 0x7f, 0x14} // 23 # ,{0x24, 0x2a, 0x7f, 0x2a, 0x12} // 24 $ ,{0x23, 0x13, 0x08, 0x64, 0x62} // 25 % ,{0x36, 0x49, 0x55, 0x22, 0x50} // 26 & ,{0x00, 0x05, 0x03, 0x00, 0x00} // 27 ' ,{0x00, 0x1c, 0x22, 0x41, 0x00} // 28 ( ,{0x00, 0x41, 0x22, 0x1c, 0x00} // 29 ) ,{0x14, 0x08, 0x3e, 0x08, 0x14} // 2a * ,{0x08, 0x08, 0x3e, 0x08, 0x08} // 2b + ,{0x00, 0x50, 0x30, 0x00, 0x00} // 2c , ,{0x08, 0x08, 0x08, 0x08, 0x08} // 2d - ,{0x00, 0x60, 0x60, 0x00, 0x00} // 2e . ,{0x20, 0x10, 0x08, 0x04, 0x02} // 2f / ,{0x3e, 0x51, 0x49, 0x45, 0x3e} // 30 0 ,{0x00, 0x42, 0x7f, 0x40, 0x00} // 31 1 ,{0x42, 0x61, 0x51, 0x49, 0x46} // 32 2 ,{0x21, 0x41, 0x45, 0x4b, 0x31} // 33 3 ,{0x18, 0x14, 0x12, 0x7f, 0x10} // 34 4 ,{0x27, 0x45, 0x45, 0x45, 0x39} // 35 5 ,{0x3c, 0x4a, 0x49, 0x49, 0x30} // 36 6 ,{0x01, 0x71, 0x09, 0x05, 0x03} // 37 7 ,{0x36, 0x49, 0x49, 0x49, 0x36} // 38 8 ,{0x06, 0x49, 0x49, 0x29, 0x1e} // 39 9 ,{0x00, 0x36, 0x36, 0x00, 0x00} // 3a : ,{0x00, 0x56, 0x36, 0x00, 0x00} // 3b ; ,{0x08, 0x14, 0x22, 0x41, 0x00} // 3c < ,{0x14, 0x14, 0x14, 0x14, 0x14} // 3d = ,{0x00, 0x41, 0x22, 0x14, 0x08} // 3e > ,{0x02, 0x01, 0x51, 0x09, 0x06} // 3f ? ,{0x32, 0x49, 0x79, 0x41, 0x3e} // 40 @ ,{0x7e, 0x11, 0x11, 0x11, 0x7e} // 41 A ,{0x7f, 0x49, 0x49, 0x49, 0x36} // 42 B ,{0x3e, 0x41, 0x41, 0x41, 0x22} // 43 C ,{0x7f, 0x41, 0x41, 0x22, 0x1c} // 44 D ,{0x7f, 0x49, 0x49, 0x49, 0x41} // 45 E ,{0x7f, 0x09, 0x09, 0x09, 0x01} // 46 F ,{0x3e, 0x41, 0x49, 0x49, 0x7a} // 47 G ,{0x7f, 0x08, 0x08, 0x08, 0x7f} // 48 H ,{0x00, 0x41, 0x7f, 0x41, 0x00} // 49 I ,{0x20, 0x40, 0x41, 0x3f, 0x01} // 4a J ,{0x7f, 0x08, 0x14, 0x22, 0x41} // 4b K ,{0x7f, 0x40, 0x40, 0x40, 0x40} // 4c L ,{0x7f, 0x02, 0x0c, 0x02, 0x7f} // 4d M ,{0x7f, 0x04, 0x08, 0x10, 0x7f} // 4e N ,{0x3e, 0x41, 0x41, 0x41, 0x3e} // 4f O ,{0x7f, 0x09, 0x09, 0x09, 0x06} // 50 P ,{0x3e, 0x41, 0x51, 0x21, 0x5e} // 51 Q ,{0x7f, 0x09, 0x19, 0x29, 0x46} // 52 R ,{0x46, 0x49, 0x49, 0x49, 0x31} // 53 S ,{0x01, 0x01, 0x7f, 0x01, 0x01} // 54 T ,{0x3f, 0x40, 0x40, 0x40, 0x3f} // 55 U ,{0x1f, 0x20, 0x40, 0x20, 0x1f} // 56 V ,{0x3f, 0x40, 0x38, 0x40, 0x3f} // 57 W ,{0x63, 0x14, 0x08, 0x14, 0x63} // 58 X ,{0x07, 0x08, 0x70, 0x08, 0x07} // 59 Y ,{0x61, 0x51, 0x49, 0x45, 0x43} // 5a Z ,{0x00, 0x7f, 0x41, 0x41, 0x00} // 5b [ ,{0x02, 0x04, 0x08, 0x10, 0x20} // 5c ¥ ,{0x00, 0x41, 0x41, 0x7f, 0x00} // 5d ] ,{0x04, 0x02, 0x01, 0x02, 0x04} // 5e ^ ,{0x40, 0x40, 0x40, 0x40, 0x40} // 5f _ ,{0x00, 0x01, 0x02, 0x04, 0x00} // 60 ` ,{0x20, 0x54, 0x54, 0x54, 0x78} // 61 a ,{0x7f, 0x48, 0x44, 0x44, 0x38} // 62 b ,{0x38, 0x44, 0x44, 0x44, 0x20} // 63 c ,{0x38, 0x44, 0x44, 0x48, 0x7f} // 64 d ,{0x38, 0x54, 0x54, 0x54, 0x18} // 65 e ,{0x08, 0x7e, 0x09, 0x01, 0x02} // 66 f ,{0x0c, 0x52, 0x52, 0x52, 0x3e} // 67 g ,{0x7f, 0x08, 0x04, 0x04, 0x78} // 68 h ,{0x00, 0x44, 0x7d, 0x40, 0x00} // 69 i ,{0x20, 0x40, 0x44, 0x3d, 0x00} // 6a j ,{0x7f, 0x10, 0x28, 0x44, 0x00} // 6b k ,{0x00, 0x41, 0x7f, 0x40, 0x00} // 6c l ,{0x7c, 0x04, 0x18, 0x04, 0x78} // 6d m ,{0x7c, 0x08, 0x04, 0x04, 0x78} // 6e n ,{0x38, 0x44, 0x44, 0x44, 0x38} // 6f o ,{0x7c, 0x14, 0x14, 0x14, 0x08} // 70 p ,{0x08, 0x14, 0x14, 0x18, 0x7c} // 71 q ,{0x7c, 0x08, 0x04, 0x04, 0x08} // 72 r ,{0x48, 0x54, 0x54, 0x54, 0x20} // 73 s ,{0x04, 0x3f, 0x44, 0x40, 0x20} // 74 t ,{0x3c, 0x40, 0x40, 0x20, 0x7c} // 75 u ,{0x1c, 0x20, 0x40, 0x20, 0x1c} // 76 v ,{0x3c, 0x40, 0x30, 0x40, 0x3c} // 77 w ,{0x44, 0x28, 0x10, 0x28, 0x44} // 78 x ,{0x0c, 0x50, 0x50, 0x50, 0x3c} // 79 y ,{0x44, 0x64, 0x54, 0x4c, 0x44} // 7a z ,{0x00, 0x08, 0x36, 0x41, 0x00} // 7b { ,{0x00, 0x00, 0x7f, 0x00, 0x00} // 7c | ,{0x00, 0x41, 0x36, 0x08, 0x00} // 7d } ,{0x10, 0x08, 0x08, 0x10, 0x08} // 7e ? ,{0x00, 0x06, 0x09, 0x09, 0x06} // 7f ? }; // end char ASCII[96][5]

// main int main(void) { unsigned int pb_clock;

SYSTEMConfig(SYS_FREQ, SYS_CFG_WAIT_STATES | SYS_CFG_PCACHE);

   // configure for multi-vectored mode
   INTConfigureSystem(INT_SYSTEM_CONFIG_MULT_VECTOR);

   // enable multi-vector interrupts 
   INTEnableSystemMultiVectoredInt();

// initialize the leds mInitAllLEDs(); mLED_1_Off(); // low mLED_2_On(); // low

LcdInitialise(); LcdClear();

int a,b; char Str[15]; // Draw a Box //for(b=1000; b>0; b--){ //drawLine(); //for(a=0; a<=5 ; a++){ gotoXY(0,1); // Put text in Box LcdString("1 Test1"); gotoXY(0,0); LcdString("012345678901"); gotoXY(25,2); LcdString("Test2"); gotoXY(16,3); LcdString("Test3");

gotoXY(0,2); LcdString("2"); gotoXY(0,3); LcdString("3"); gotoXY(0,4); LcdString("4"); gotoXY(0,5); LcdString("5");

/* gotoXY(24,3); LcdCharacter('H'); LcdCharacter('E'); LcdCharacter('L'); LcdCharacter('L'); LcdCharacter('O'); LcdCharacter(' '); LcdCharacter('='); // Draw + at this position gotoXY(10,3); LcdCharacter('='); //delay(500); gotoXY(24,3); LcdCharacter('h'); LcdCharacter('e'); LcdCharacter('l'); LcdCharacter('l'); LcdCharacter('o'); LcdCharacter(' '); LcdCharacter('-'); // Draw - at this position gotoXY(10,3); LcdCharacter('-');

/

mLED_1_On();

while(1) {

sprintf(Out_Buffer,"a=%d",somevariable); gotoXY(25,4); LcdString(Out_Buffer); }

return 0; } // end main

/////////////////////////////////////////////////////////////////////////////////////// ///////// LCD Functions ///////////////////////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////

void LcdCharacter(char character) {

 LcdWrite(LCD_D, 0x00);
 int index;
 for (index = 0; index < 5; index++)
 {
   LcdWrite(LCD_D, ASCII[character - 0x20][index]);
   //LcdWrite(LCD_D, ASCII[character - 0x20 + index]);
 }
 LcdWrite(LCD_D, 0x00);

}

void LcdClear(void) {

 int index;
 for (index = 0; index < LCD_X * LCD_Y / 8; index++)
 {
   LcdWrite(LCD_D, 0x00);
 }

}

void LcdInitialise(void) {

 //pinMode(PIN_SCE,   OUTPUT);
 //pinMode(PIN_RESET, OUTPUT);
 //pinMode(PIN_DC,    OUTPUT);
 //pinMode(PIN_SDIN,  OUTPUT);
 //pinMode(PIN_SCLK,  OUTPUT);

 mInitLCDPins();
 SpiChnOpen(SPI_CHANNEL1A, SPI_OPEN_MSTEN|SPI_OPEN_MODE8|SPI_OPEN_ON, GetPeripheralClock()/100000); // will open SPI3 and set the bit rate to .1MHz

 //digitalWrite(PIN_RESET, LOW);
// delay(1);
 //digitalWrite(PIN_RESET, HIGH);

 mRESET_Low();
 mRESET_High();

 mSCE_High();

 LcdWrite(LCD_C, 0x21 );  // LCD Extended Commands.
 LcdWrite(LCD_C, 185 );  // Set LCD Vop (Contrast). //B1
 LcdWrite(LCD_C, 0x04 );  // Set Temp coefficent. //0x04
 LcdWrite(LCD_C, 0x14 );  // LCD bias mode 1:48. //0x13
 LcdWrite(LCD_C, 0x0C );  // LCD in normal mode. 0x0d for inverse
 LcdWrite(LCD_C, 0x20);
 LcdWrite(LCD_C, 0x0C);

}

void LcdString(char *characters) {

 while (*characters)
 {
   LcdCharacter(*characters++);
 }

}

void LcdWrite(char dc, char data) {

 //digitalWrite(PIN_DC, dc);
 //digitalWrite(PIN_SCE, LOW);

 if(dc) {
   mDC_High();
 }
 else {
   mDC_Low();
 }
 mSCE_Low();

 //shiftOut(PIN_SDIN, PIN_SCLK, MSBFIRST, data);
 SpiChnPutC(SPI_CHANNEL1A, data);

int i; for (i=0; i<10000; i++) { Nop(); }

 //digitalWrite(PIN_SCE, HIGH);

 mSCE_High();

}

// gotoXY routine to position cursor // x - range: 0 to 84 // y - range: 0 to 5 void gotoXY(int x, int y) {

 LcdWrite( 0, 0x80 | x);  // Column.
 LcdWrite( 0, 0x40 | y);  // Row.

}

void drawLine(void) {

 unsigned char  j;  
 for(j=0; j<84; j++) // top
 {
   gotoXY (j,0);
   LcdWrite (1,0x01);
 } 	
 for(j=0; j<84; j++) //Bottom
 {
   gotoXY (j,5);
   LcdWrite (1,0x80);
 }

 for(j=0; j<6; j++) // Right
 {
   gotoXY (83,j);
   LcdWrite (1,0xff);
 } 	
 for(j=0; j<6; j++) // Left
 {
   gotoXY (0,j);
   LcdWrite (1,0xff);
 }

}

NU32v2: Nokia 5110 LCD

Code

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Tools

Search