Interfacing with a mouse

From Mech
Revision as of 00:46, 12 February 2009 by Chris Carhart (talk | contribs)
Jump to navigationJump to search

Original Assignment

Interface the PIC with a PS/2 optical mouse and display (x,y) position data on either an LCD screen (see, e.g., C Example: Serial LCD or C Example: Parallel Interfacing with LCDs) or the PC (e.g., in Matlab or hyperterminal).

Overview

File:Lynxmouse
Ione Lynx-M9 mouse [1]

The goal of the project is to interface the PIC184520 with a PS/2 mouse - specifically, an ione Lynx-M9 Wheel Optical mouse with a USB to PS/2 adapter. When the mouse moves, its XY coordinates will be displayed on an LCD screen.

The PS/2 connector is traditionally used to connect mice and keyboards to computer systems. The connector uses six pins: clock, data, 5V, GND and two that are not connected. The PS/2 connector is fully documented here: PS/2 connector. We used a Parallax PS/2 to Breadboard Adapter for connect the optical mouse to the PIC18. Documentation and ordering information for the adapter can be found here: Breadboard Adapter.

PS/2 Interface