File:Dimensioned Drawing of Steering Fork.pdf
From Mech
Revision as of 15:01, 17 March 2010 by NoahPentelovitch (talk | contribs) (This is a dimensioned drawing of the front wheel steering fork. The upper shaft of the fork is sized for a press fit into the 1/4" inner diameter bearing, which is press fit on the chassis. The fork is made from 2" Aluminum 6061.)
Dimensioned_Drawing_of_Steering_Fork.pdf (file size: 96 KB, MIME type: application/pdf)
This is a dimensioned drawing of the front wheel steering fork. The upper shaft of the fork is sized for a press fit into the 1/4" inner diameter bearing, which is press fit on the chassis. The fork is made from 2" Aluminum 6061.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 15:01, 17 March 2010 | (96 KB) | NoahPentelovitch (talk | contribs) | This is a dimensioned drawing of the front wheel steering fork. The upper shaft of the fork is sized for a press fit into the 1/4" inner diameter bearing, which is press fit on the chassis. The fork is made from 2" Aluminum 6061. |
You cannot overwrite this file.
File usage
The following page uses this file: