File:Dimensioned Drawing of Chassis.pdf
From Mech
Revision as of 15:37, 17 March 2010 by NoahPentelovitch (talk | contribs) (This is a dimensioned drawing of the chassis of the Fluffbot. The top most hole is for the bearing and it is sized for a press fit. The main center hole is for the motor shaft. There is also a well that is dimensioned to be drilled down to accommodate the)
Dimensioned_Drawing_of_Chassis.pdf (file size: 31 KB, MIME type: application/pdf)
This is a dimensioned drawing of the chassis of the Fluffbot. The top most hole is for the bearing and it is sized for a press fit. The main center hole is for the motor shaft. There is also a well that is dimensioned to be drilled down to accommodate the motor's shape. The body is made out of Acryclic. It is recommended that the entire body including holes be laser cut because the Acrylic will shatter if one attempts to drill into it with too large of a drill bit.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 15:37, 17 March 2010 | (31 KB) | NoahPentelovitch (talk | contribs) | This is a dimensioned drawing of the chassis of the Fluffbot. The top most hole is for the bearing and it is sized for a press fit. The main center hole is for the motor shaft. There is also a well that is dimensioned to be drilled down to accommodate the |
You cannot overwrite this file.
File usage
The following page uses this file: