Difference between revisions of "Attaching to a shaft"

From Mech
Jump to navigationJump to search
Line 1: Line 1:
There are many ways to attach to a shaft (e.g., a motor shaft). Below are a few examples.
There are many ways to attach to a shaft (e.g., a motor shaft). Below are a few examples.


* [http://www.eminebea.com/content/html/en/engineering/bearings/fitting.shtml Press fit or interference fit] (note: be careful not to apply press forces large enough to break the motor)
* [http://www.eminebea.com/content/html/en/engineering/bearings/fitting.shtml Press fit or interference fit] (note: be careful not to apply press forces large enough to damage the motor)
* [http://en.wikipedia.org/wiki/Set_screw Set screws]
* [http://en.wikipedia.org/wiki/Set_screw Set screws]
* Split clamp [[Image:split-clamp.gif]]
* Split clamp [[Image:split-clamp.gif]]

Revision as of 12:56, 14 February 2009

There are many ways to attach to a shaft (e.g., a motor shaft). Below are a few examples.


  • Keyway Keyway.jpg


  • Epoxy