Unipolar Stepper Motor Driver Circuit

From Mech
Revision as of 10:54, 27 July 2006 by Stephens (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

This page presents a circuit for driving high-power unipolar stepper motors. Here you will find all the information needed to make your own.

What you need

  • Power
    • +5v (low power)
    • +12v (high power)
  • ICs
    • L297 Stepper Controller
  • Discrete Components
    • (4x) 2N6045 NPN Darlington Transistor
    • (8x) 1N4001 Diodes
    • (2x) 3.3kOhm Resistors
Retrieved from "https://hades.mech.northwestern.edu//index.php?title=Unipolar_Stepper_Motor_Driver_Circuit&oldid=3588"