NU32v2: Counters and Timers

Timers are the simplest way to generate accurate time-based events such as flashing an LED at a given frequency. They are also useful for counting external pulses or accurate timing measurements of events.

Overview

The PIC32 is equipped with 5 16-bit timers (Timer1, Timer2, Timer3, Timer4, and Timer5). The basic idea of a timer is that it increments based on a clock signal.

In software, the user selects whether the timer increments using an internal clock or an external clock. The internal clock is based on the frequency of the peripheral bus. For the NU32v2, the peripheral bus frequency is set at 80 MHz. The external clock would be used if you wanted to count external pulses such as from an encoder. Each of the timers has a pin labeled 'TXCK' that can be used for the external clock. Additionally, the user selects a prescalar that determines how many pulses the timer receives from the clock before it adds one to the existing value.

Each timer can be configured to generate interrupts at a given priority.

The PIC32 has two types of timers:

• Timer A: (Timer1) is an asynchronous timer with a built in oscillator, can operate in sleep mode and has prescalars of 1:1, 1:8, 1:64, and 1:256
• Timer B: (Timer2, Timer3, Timer4, Timer5) has the ability to form a a 32-bit timer, has prescalars of 1:1, 1:2, 1:4, 1:16, 1:32, 1:64 and 1:256 and can have event triggers.