PIC32MX: SPI External RAM
From Mech
Jump to navigationJump to searchOriginal Assignment
Do not erase this section!
Your assignment is to interface to the SPI 23K256 SRAM chip.
Overview
This page will guide you how to interface the PIC32 board with the 23K256 external RAM using SPI.
Circuit
Circuit diagram showing PIC32 connected to external RAM 23K256. The circuit is an edited version of a circuit from this microchip documentation [1].
Code
1. Go to this link [2] and download "AN1277 Source Code" folder.
2. Add the PIC32 files and other requirements, instructions here [3].
3. Edit the main.c file you downloaded from step 1 to match usage for the PIC32 board. The original code is also edited make testing easier.
#include <plib.h> #include <string.h> #include "HardwareProfile.h" #include "SRAMDriver.h" // Configuration Bit settings // SYSCLK = 80 MHz (8MHz Crystal/ FPLLIDIV * FPLLMUL / FPLLODIV) // PBCLK = 40 MHz // Primary Osc w/PLL (XT+,HS+,EC+PLL) // WDT OFF // Other options are don't care // #pragma config FPLLMUL = MUL_20, FPLLIDIV = DIV_2, FPLLODIV = DIV_1, FWDTEN = OFF #pragma config POSCMOD = HS, FNOSC = PRIPLL, FPBDIV = DIV_1 int main(void) { unsigned char ReadVal,Cnt; unsigned char RandomSendData; unsigned char SRAMBufPage[SRAMPageSize]; unsigned char SRAMBufCheckPage[SRAMPageSize]; unsigned char SRAMBufSeq[10]; unsigned char SRAMBufCheckSeq[10]; // Configure the device for maximum performance but do not change the PBDIV // Given the options, this function will change the flash wait states, RAM // wait state and enable prefetch cache but will not change the PBDIV. // The PBDIV value is already set via the pragma FPBDIV option above.. SYSTEMConfig(SYS_FREQ, SYS_CFG_WAIT_STATES | SYS_CFG_PCACHE); InitSRAM(); while(1) { //Byte Mode SRAMWriteStatusReg(SRAMByteMode); //Write random byte to 0x0010 memory location of SRAM RandomSendData = rand(); SRAMWriteByte(0x00,0x10,RandomSendData); //Read 0x0010 memory location of SRAM ReadVal = SRAMReadByte(0x00,0x10); //Page Mode SRAMWriteStatusReg(SRAMPageMode); memset(SRAMBufPage,0,sizeof(SRAMBufPage)); //Reset SRAMBuf location to 0x00 value memset(SRAMBufCheckPage,0,sizeof(SRAMBufCheckPage)); //Reset SRAMBuf location to 0x00 value //Write 32bytes from SRAMBuf array to first page of SRAM for(Cnt = 0;Cnt<32;Cnt++) { SRAMBufPage[Cnt] = (rand()); } SRAMWritePage(0x00,0x20,SRAMBufPage); //Read 32bytes from SRAMBuf array from first page of SRAM SRAMReadPage(0x00,0x20,SRAMBufCheckPage); //Sequential Mode memset(SRAMBufSeq,0,sizeof(SRAMBufSeq)); //Reset SRAMBuf location to 0x00 value memset(SRAMBufCheckSeq,0,sizeof(SRAMBufCheckSeq)); //Reset SRAMBufCheckSeq location to 0x00 value //Write 10bytes from SRAMBuf to SRAM starting from 0x0010 memory location for(Cnt = 0;Cnt<32;Cnt++) { SRAMBufSeq[Cnt] =(rand()); } SRAMWriteStatusReg(SRAMSeqMode); SRAMWriteSeq(0x10,0x10,SRAMBufSeq,10); //Read 10bytes starting from 0x1010 memory location of SRAM and store it to SRAMBuf array SRAMReadSeq(0x10,0x10,SRAMBufCheckSeq,10); } }