Difference between revisions of "Machine Vision Localization System"
From Mech
Jump to navigationJump to searchLine 21: | Line 21: | ||
==Target Patterns== |
==Target Patterns== |
||
The target patterns and preprocessor can be downloaded at [[Indoor_Localization_System]]. |
The target patterns and preprocessor can be downloaded at [[Indoor_Localization_System]]. |
||
=Operation= |
|||
==Setting up the Cameras== |
|||
The cameras should be set up according to [[Indoor_Localization_System]] with one caveat: targets at the edge of the camera frame will now be discarded. |
Revision as of 21:25, 15 January 2009
Overview
This is a machine vision systems that tracks multiple targets and can send out the positions via the serial port. It is based upon the Indoor_Localization_System, but has several enhancements and bug fixes. Refer to Indoor_Localization_System for a basic overview of the setup of the system and the workings of the patter identification algorithm.
Major Enhancements/Changes
- The system will now mark the targets with an overlay and display coordinate data onscreen.
- The serial output is now formatted for the XBee radio using the XBee's API mode with escape characters.
- The calibration routine has been improved, and only needs to be performed once.
- A command interface for sending out commands via the serial port has been added.
- The system will discard targets too close to the edge of the camera frame to prevent misidentification due to clipping.
- The origin of the world coordinate is now in the middle, not the lower left corner.
- The GUI displaying the camera frames is now full sized instead of a thumbnail. However, if your monitor isn't big enough, you can resize them.
Major Bug Fixes
- Two major memory leaks fixed.
- Calibration matricies are now calculated correctly.
- File handling bug that causes an off-by-one error in LoadTargetData() fixed.
Camera Calibration Routine
The camera calibration routine used is explained in the document Image_Formation_and Camera_Calibration.pdf by Professor Ying Wu.
Target Patterns
The target patterns and preprocessor can be downloaded at Indoor_Localization_System.
Operation
Setting up the Cameras
The cameras should be set up according to Indoor_Localization_System with one caveat: targets at the edge of the camera frame will now be discarded.