Swarm Robot Project Documentation: Difference between revisions
From Mech
Jump to navigationJump to search
Content deleted Content added
| Line 9: | Line 9: | ||
<br clear="all"> |
<br clear="all"> |
||
=== |
===Board In Development=== |
||
A version of the e-puck with a color sensor circuit built in |
[[Image:epuck_xbee_board_v2.gif|thumb|left]]A version of the e-puck with a color sensor circuit built in can be downloaded here: [[Media:epuck_xbee_board_v2.PCB]] |
||
<br clear='all'> |
|||
Revision as of 16:25, 12 January 2009
XBee Interface Extension Board
The XBee Interface Extension Board was created with Traxmaker. The extension modules plug into the e-puck via Samtec BTE-020-02-L-D-A connectors, which can be obtained directly from Samtec or one of their distributors. The Traxmaker parts library, which contains the connector and can be downloaded here: Media:Traxmaker_XBee_Lbrary.zip.
Current Version
The Traxmaker file for the current version of the XBee extension board can be downloaded here :Media:e-puck_xbee_board_v1.PCB. Note that the CTS and RTS pins were connected to the sel2 and sel3 pins (instead of y0 and y1) by soldering on jumper wires.
Board In Development
A version of the e-puck with a color sensor circuit built in can be downloaded here: Media:epuck_xbee_board_v2.PCB
