Difference between revisions of "Optoreflector"
m |
|||
| Line 10: | Line 10: | ||
[[image:optoreflectors.png|center]] |
[[image:optoreflectors.png|center]] |
||
==Using with PC/104 stack== |
|||
''Warning: If you make the sensor too sensitive, ambient light may be able to trigger it.'' |
''Warning: If you make the sensor too sensitive, ambient light may be able to trigger it.'' |
||
Revision as of 11:18, 10 August 2006
Optoreflector sensors contain a matched infrared transmitter (LED) and infrared receiver (usually a phototransistor) pair. These devices work by measuring the amount of light that is reflected into the receiver. Because the receiver also responds to ambient light, the device works best when well shielded from abient light, and when the distance between the sensor and the reflective surface is small (the graph below shows how distance affects the output value). IR reflectance sensors are often used to detect white and black surfaces. White surfaces generally reflect well, while black surfaces reflect poorly.
Application
In the mechatronics lab, we have the QRB1114 (datasheet) from Fairchild, shown below. It has four pins, with the first pair connected to the LED and the second pair connected to the phototransistor.
Warning: If you make the sensor too sensitive, ambient light may be able to trigger it.
