Difference between revisions of "**OBSOLETE** Getting Started with PIC32 and UBW32"
From Mech
Jump to navigationJump to searchAndrew Long (talk | contribs) |
Andrew Long (talk | contribs) |
||
| Line 7: | Line 7: | ||
Plug a miniUSB cord into the UBW32 and into the computer. |
Plug a miniUSB cord into the UBW32 and into the computer. |
||
The New Hardware Wizard should appear. The driver is for a COM PORT. Complete wizard and |
The New Hardware Wizard should appear. The driver is for a COM PORT. Complete wizard and select driver you downloaded. |
||
The UBW32 should now communicate with the computer. |
|||
Open a terminal (I used HyperTerminal) and type 'v'. The Firmware version should appear. |
|||
= Bootloader = |
= Bootloader = |
||
Revision as of 15:42, 9 July 2009
Follow these steps to get the UBW32 started.
Driver for UBW32
Download the driver to your computer from here.
Plug a miniUSB cord into the UBW32 and into the computer.
The New Hardware Wizard should appear. The driver is for a COM PORT. Complete wizard and select driver you downloaded.
The UBW32 should now communicate with the computer.
Open a terminal (I used HyperTerminal) and type 'v'. The Firmware version should appear.
