Difference between revisions of "Laser cutter"
From Mech
Jump to navigationJump to searchNathanHenry (talk | contribs) |
NathanHenry (talk | contribs) |
||
Line 1: | Line 1: | ||
==Overview== |
==Overview== |
||
The laser cutter, available in the prototyping lab, is an extremely useful tool for quickly cutting 2-D plastic parts. The machine uses a high intensity IR laser to cut any two dimensional design out of a plastic sheet. Acrylic is by far the best material for use with the laser cutter; when acrylic is used, the tool is capable of cutting through up to a 1/2" thick piece. |
|||
'''If you are using a plastic other than acrylic, consult with the shop staff before cutting. |
|||
If you have never used the laser cutter before, ask for help if you encounter any problems. ''' |
|||
==Creating and Importing a File== |
==Creating and Importing a File== |
||
==Using the Laser Cutter== |
==Using the Laser Cutter== |
Revision as of 13:33, 2 April 2009
Overview
The laser cutter, available in the prototyping lab, is an extremely useful tool for quickly cutting 2-D plastic parts. The machine uses a high intensity IR laser to cut any two dimensional design out of a plastic sheet. Acrylic is by far the best material for use with the laser cutter; when acrylic is used, the tool is capable of cutting through up to a 1/2" thick piece. If you are using a plastic other than acrylic, consult with the shop staff before cutting. If you have never used the laser cutter before, ask for help if you encounter any problems.