Difference between revisions of "The PC/104 Lab Kit"
From Mech
Jump to navigationJump to searchLine 71: | Line 71: | ||
| 18 || Weir/Colgate || Spring 06 || 118 || || || |
| 18 || Weir/Colgate || Spring 06 || 118 || || || |
||
|- |
|- |
||
| 19 || |
| 19 || Gabe || Winter 07 || || || ||TA for ME333 |
||
|- |
|- |
||
| 20 || David Weir || Winter 06 || 120 || 2006a+ || || only checked out pc104, not black box or breadboard |
| 20 || David Weir || Winter 06 || 120 || 2006a+ || || only checked out pc104, not black box or breadboard |
Revision as of 11:14, 13 December 2006
Kit Contents
- PC104 stack
- AC adapter for PC104 stack
- Breadboard (large) (IC chips not included)
- Breadboard (small)
- AC adapter for large breadboard (DIN 5 connector)
- Fluke Multimeter
- Battery pack
- Battery pack charger
- VGA interface cable (DE-15 connector)
- Ethernet interface cable (RJ-45 connector)
Note: when plugging the interface cables into the PC104 CPU board, the red stripe on the cable should line up with the small white triangle printed next to the socket.
Other equipment
- Serial port interface cable (DE-9 connector)
- Keyboard interface cable (PS-2 connector)
- Seetron BPI-216 LCD display
- Ethernet straight-crossover converter
- 8-inch LCD monitor (you probably won't be needing the driver if it came with one)
Known Problems with the Kits
- COM2 may not work properly with Simulink/XPC Target
- Analog outputs inverted and not quite scaled 1:1 (5V commanded out is actually approximately -4.5V) - read this
- Digital outputs are open collector circuits -- although not a problem, can be confusing, like the analog outputs - read this too
Kit User Checkout
Kit # | Owner | Date Checked Out | IP Address | xPC Version | Missing Parts | Comments/Problems |
---|---|---|---|---|---|---|
1 | Laura Winfield | haptics class fall | 106 | 2.9 | ||
2 | Laura Winfield | haptics class fall | 108 | 2.9 | DO 1-4 don't work | |
3 | Dave Kelso | BME 10/25/06 | 113 | 2006b | ||
4 | Mike Hwang | Spring 06 | 105 | |||
5 | James Solberg | Spring 06 | 112 | 3.0 | ||
6 | Malcom MacIver | |||||
7 | Alex Birdwell | 7/7/2006 | 107 | |||
8 | Laura Winfield | Haptics class fall | 111 | 2.9 | large Breadboard | |
9 | Dave Kelso | BME | 110 | 2006b | ||
10 | Laura Winfield | Haptics class fall | 104 | 2.9 | ||
11 | Laura Winfield | Haptics class fall | 109 | 2.9 | Large Breadboard | |
12 | Jean-Michel | 10/23/06 | 102 | 2.9 | Large Breadboard | |
13 | Colgate | Winter 06 | 101 | haptic paddle/friction demo | ||
14 | Aimee | 114 | ||||
15 | 115 | 2.9 | all except pc104 | base of pc104 not attached | ||
16 | Dave Kelso | BME | 116 | 2006b | ||
17 | 117 | 2.9 | all except pc104 | |||
18 | Weir/Colgate | Spring 06 | 118 | |||
19 | Gabe | Winter 07 | TA for ME333 | |||
20 | David Weir | Winter 06 | 120 | 2006a+ | only checked out pc104, not black box or breadboard | |
21 | Encoder 1 pins broken | |||||
22 | 122 | 2.9 | box, all but pc104 | |||
23 | Unassembled |