Difference between revisions of "Northwestern Design Competition"

Revision as of 20:27, 8 February 2011

Milestone 1

On a button press, read the value of a potentiometer and change the brightness of an LED accordingly using PWM. Note: Do not use an h-bridge or motor as previously assigned.
Due before Workshop 2 on Wed, 2/9.
Sample code from Workshop 1

Milestone 2

Due before Workshop 3 on Wed, 2/23.
Use code from NU32v2: Nokia 5110 LCD and NU32v2: Analog Input to read a potentiometer and print the voltage to the Nokia 5110
Optically isolate a motor and control its velocity based on the potentiometer reading
Do 1 of the following:
- Mount a phototransistor to a laser and detect a cake OR
- Detect a line of electrical tape on white paper

Wiki pages on sensors, actuators, programming, and microcontrollers: use pages below

@@ Line 8: / Line 8: @@
 '''Milestone 2'''
 *Due before Workshop 3 on Wed, 2/23.
+*Use code from [[NU32v2: Nokia 5110 LCD]] and [[NU32v2: Analog Input]] to read a potentiometer and print the voltage to the Nokia 5110
+*Optically isolate a motor and control its velocity based on the potentiometer reading
+*Do 1 of the following:
+**Mount a phototransistor to a laser and detect a cake '''OR'''
+**Detect a line of electrical tape on white paper
 ==Previous Years==