View source for PC/104 stacks and Matlab xPC

*[[The PC/104 Lab Kit]]
*[[Configuring xPC Target PC]]
*[[PC104 Overview]]
*[[Advantech CPU Card]]
* [[Sensoray 526 Data Aquisition Card]]
*[[XPC Overview]]
*[[Common xPC Blocks]]
*[[XPC M-file Communication]]
*[[XPC Code From Student Projects]]
*[[Creating a Simple xPC Program]]
*[[Using the Host Scope]]
*[[PC104 Break Out Board]]
*[[PC104 Power]]
*[http://www.mech.northwestern.edu/courses/433/Writeups/PC104BoB/stack.htm#power Power Components]
*[http://www.mech.northwestern.edu/courses/433/Writeups/PC104BoB/stack.htm#electrical I/O Electronics: Analog I/O, Digital I/O, Encoder Connections]
* Advanced: Creating a Working Stack from Parts
** [http://www.mech.northwestern.edu/courses/433/Writeups/PC104BoB/stack.htm Building the Breakout Board]
** [http://www.mech.northwestern.edu/courses/433/Writeups/PC104BoB/stack.htm#ribboncables Breakout Board Ribbon Cables]
** [http://www.mech.northwestern.edu/courses/433/Writeups/PC104BoB/stack.htm#mechanical Assembling the PC104 Stack]
**[[Creating an xPC Flash Boot Disk]]

<h3>xPC Target Real-Time Operating System</h3>

* [[xPC Overview|Overview of Real-Time Programming with Simulink and xPC Target]]
* [[Configuring xPC Target PC|Configuring xPC Host/Target PC]]
* [[Creating a Simple xPC Program|'''Quickstart''':Creating a simple xPC Program]]
* [[Common xPC Blocks|Commonly Used Blocks]]
* [[Using the Host Scope]]
*Advanced
** Model Properties
** [[XPC M-file Communication|M-file communication]]
** Using outside of the lab
** [[media:standalone.pdf|Standalone Mode]]
** Stateflow
* Code Examples
** [[Controlling a DC Motor with an Encoder]]
** Something With State Machine
** [[Using RS-232 and Printing to LCD]]
**[[UDP Communications between Target and Host PC]]
** M-functions and S-functions
** [[xPC Code From Student Projects]]
<br clear=all/>