View source for NU32v2: What is in the NU32v2 Kit

[[Image:nu32v2_kitbag.jpg|thumb|500px|The NU32v2 kit.|center]]

The NU32v2 kit contains everything necessary to begin programming the NU32v2 board.  Check to make sure your bag contains all of the items listed below.
'''Components in the kit:'''
<table border="1">
<tr>
<th>Picture</th>
<th>Description</th>
<th>Link</th>
</tr>

<tr>
<td>[[Image:nu32v2_breakoutbreadboardsswitch.jpg|thumb|200px|The NU32v2|center]]</td>
<td>NU32v2 in 2 breadboards with a switch between GND and the G6 pin</td>
<td>[[http://hades.mech.northwestern.edu/index.php/NU32v2:_Software_to_Install]], [[http://hades.mech.northwestern.edu/index.php/NU32v2:_Starting_a_New_Project_and_Putting_it_on_the_NU32v2 Starting a New Project]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_usbcable.jpg|thumb|200px|USB Cable|center]]</td>
<td>1 m USB cable, A male to mini B male</td>
<td>[[Media:usbcable.pdf|Datasheet]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_9vpower.jpg|thumb|200px|9V Power Supply|center]]</td>
<td>9V wall power supply, 0.66A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model EPS090066-P5P from CUI Inc.</td>
<td>[[Media:powersupply9v.pdf|Datasheet]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_3to1outlet.jpg|thumb|200px|3 3 pin to 2 pin Power Outlet|center]]</td>
<td>1 to 3 power outlet, 2 prong to 3 prong outlet</td>
<td>Powtech PT-7803GG</td>
</tr>

<tr>
<td>[[Image:nu32v2_wirestrippers.jpg|thumb|200px|Wirestrippers|center]]</td>
<td>Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. '''Do not try to cut anything else with these, they will get dull''' </td>
<td>[http://www.sparkfun.com/products/8696 Sparkfun wire strippers]</td>
</tr>

<tr>
<td>[[Image:nu32v2_wire.jpg|thumb|200px|Wire|center]]</td>
<td>6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue)</td>
<td>no link</td>
</tr>

<tr>
<td>[[Image:nu32v2_nokia5110.jpg|thumb|200px|Nokia 5110 LCD|center]]</td>
<td>Monochrome Nokia LCD, 84x48 pixels, using SPI communication</td>
<td>[http://www.sparkfun.com/products/10168 Nokia 5110], [[Media:nokia5110.pdf|Datasheet]], [[http://hades.mech.northwestern.edu/index.php/NU32v2:_Nokia_5110_LCD]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_multimeter.jpg|thumb|200px|DVM810 Multimeter|center]]</td>
<td>Small multimeter, Velleman DVM810. '''Does not have automatic shutoff. Battery will not last more than 12 hours if left on.'''</td>
<td>[http://www.kiesub.com/prostores/servlet/-strse-877/DIGITAL-DVM810-METER-MULTIMETER/Detail Multimeter], [[Media:DVM810.pdf|Datasheet]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_ledarray.jpg|thumb|200px|LED array|center]]</td>
<td>10 LED array, green.</td>
<td>[[Media:ledarray.pdf|Datasheet]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_resistorarray.jpg|thumb|200px|Resistor array|center]]</td>
<td>9 pin, 8 resistor, 330 Ohm common cathode bus. Dot indicates common pin. For use with the LED array.</td>
<td>[[Media:resistorarray330ohm.pdf|Datasheet]]</td>
</tr>

<tr>
<td>[[Image:nu32v2_breadboard.jpg|thumb|200px|Extra Breadboard|center]]</td>
<td>Extra breadboard, 830 tie points.</td>
<td>[http://www.mpja.com/prodinfo.asp?number=4443+TE 830 T/P Breadboard]</td>
</tr>

<tr>
<td>[[Image:nu32v2_pushbutton.jpg|thumb|200px|Pushbutton|center]]</td>
<td>Momentary NO pushbutton.</td>
<td>[[Media:pushbutton.pdf|Datasheet]]</td>
</tr>

</table>