XBee Interface Board

From Mech
Jump to navigationJump to search

The pins on the XBee radio have a pitch of 2 mm, which makes it impossible to plug into a standard 0.1 inch pitch breadboard. The XBee Interface Board allows one to plug the XBee into a breadboard or directly into a FTDI USB-RS232 cable.

Board Schematic

Xbee board schematic.gif


Populating the Board

Xbee interface pcb.jpg

This is the PCB. If the PCB has fibers sticking out of the edge, scrape or file them off. These are glass fibers, and can stick into your finger like a splinter.