Difference between revisions of "XBee Interface Board"
From Mech
Jump to navigationJump to searchLine 1: | Line 1: | ||
__TOC__ |
__TOC__ |
||
The pins on the XBee radio have a pitch of 2 mm, which makes it impossible to plug into a standard 0.1 inch pitch breadboard. The XBee Interface Board allows one to plug the XBee into a breadboard or directly into a FTDI USB-RS232 cable. |
The pins on the XBee radio have a pitch of 2 mm, which makes it impossible to plug into a standard 0.1 inch pitch breadboard. The XBee Interface Board allows one to plug the XBee into a breadboard or directly into a FTDI USB-RS232 cable. |
||
==Board Schematic== |
Revision as of 22:46, 4 April 2008
The pins on the XBee radio have a pitch of 2 mm, which makes it impossible to plug into a standard 0.1 inch pitch breadboard. The XBee Interface Board allows one to plug the XBee into a breadboard or directly into a FTDI USB-RS232 cable.