Unipolar Stepper Motor Driver Circuit

From Mech
Revision as of 14:35, 27 July 2006 by Stephens (talk | contribs)
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This page presents a circuit for driving high-power unipolar stepper motors. Here you will find all the information needed to make your own. This circuit allows step-level control and can be easily modified for other modes of operation. (NOTE: Alternative is to use the DS2003)

What you need

Circuit Schematic and Photo

The L297 has several inputs that can be generated by a PC/104 stack or other controller. This circuit allows you to control each step, in full-step mode. Meaning: You can tell it to move one step in either direction (of course you can make it move fast and it will continuously rotate). The two inputs are a direction and a pulse. In the next section you will find a program to control this using xPC.

Here is the CircuitMaker file: Unipolar Stepper Driver Circuit

Unipolar motor driver.jpg Unipolar motor circuit photo.jpg

You may find the following diagrams useful when constructing this circuit:

L297 pinout.jpg NPN pinout.png Stepper wire colors.png