Difference between revisions of "Test"
From Mech
Jump to navigationJump to search| Line 9: | Line 9: | ||
If <math>V_{in}</math> < -0.7V, then the current is amplified by the pnp transistor. |
If <math>V_{in}</math> < -0.7V, then the current is amplified by the pnp transistor. |
||
Beware that there is a |
Beware that there is a "dead band" when V<sub>in</sub> is between 0.7V and -0.7V, because the voltage has not pass the cutoff voltage for either transistor. This is known as '''crossover distortion'''. |
||
Revision as of 10:17, 19 August 2009
.
Push-Pull Follower
If we put two emitter followers together (npn transistor for positive voltages; pnp transistor for negative voltages), we get a push-pull follower.
If > 0.7V, then the current is amplified by the npn transistor.
If < -0.7V, then the current is amplified by the pnp transistor.
Beware that there is a "dead band" when Vin is between 0.7V and -0.7V, because the voltage has not pass the cutoff voltage for either transistor. This is known as crossover distortion.
