Difference between revisions of "Swarm Robot Project Documentation"
From Mech
Jump to navigationJump to search| Line 2: | Line 2: | ||
==XBee Interface Extension Board== |
==XBee Interface Extension Board== |
||
The XBee Interface Extension Board was created with Traxmaker. The parts library can be downloaded [[Media:Traxmaker_XBee_Lbrary.zip |
The XBee Interface Extension Board was created with Traxmaker. The extension modules plug into the e-puck via Samtec BTE-020-02-L-D-A connectors, which can be obtained directly from Samtec or one of their distributors. The Traxmaker parts library, which contains the connector and can be downloaded here: [[Media:Traxmaker_XBee_Lbrary.zip]]. |
||
===Current Version=== |
|||
The Traxmaker file for the current version of the XBee extension board can be downloaded here :[[Media:e-puck_xbee_board_v1.PCB]]. Note that the CTS and RTS pins were connected to the sel2 and sel3 pins by soldering on jumper wires. |
|||
===Future Version=== |
|||
A version of the e-puck with a color sensor circuit built in |
|||
Revision as of 15:25, 12 January 2009
XBee Interface Extension Board
The XBee Interface Extension Board was created with Traxmaker. The extension modules plug into the e-puck via Samtec BTE-020-02-L-D-A connectors, which can be obtained directly from Samtec or one of their distributors. The Traxmaker parts library, which contains the connector and can be downloaded here: Media:Traxmaker_XBee_Lbrary.zip.
Current Version
The Traxmaker file for the current version of the XBee extension board can be downloaded here :Media:e-puck_xbee_board_v1.PCB. Note that the CTS and RTS pins were connected to the sel2 and sel3 pins by soldering on jumper wires.
Future Version
A version of the e-puck with a color sensor circuit built in
