RC Servo Theory

From Mech
(Difference between revisions)
Jump to: navigation, search
m

Revision as of 16:47, 31 May 2006

The control signal for an RC Servo is a digital pulse train that looks something like this:

555 control.jpg

Here, the width of the “high” pulse, t, determines the angle of the rotor. The width, measured in time, will be in the range of

0.3 ms \leq t \leq 2.5 ms

And the frequency of the pulses, given by f=1/T, is around 40-50Hz (T ≈ 20ms).

For a practical circuit, see 555 Servo Circuit.

Personal tools