Difference between revisions of "Photodiodes and Phototransistors"

From Mech
Jump to navigationJump to search
m
Line 1: Line 1:
==Phototransistors==
==Phototransistors==
[[image:phototransistor amplifiers.png|right]]
[[image:phototransistor amplifiers.png|right|300px]]
Phototransistors are transistors with the base terminal exposed. Instead of applying a voltage to the base, the photons from striking light activate the transistor.
Phototransistors are transistors with the base terminal exposed. Instead of applying a voltage to the base, the photons from striking light activate the transistor.


Line 6: Line 6:
The phototransistor can be used in two different modes: 1) active & 2) switch. These modes are controlled by changing the value of the resistor. The equations are:
The phototransistor can be used in two different modes: 1) active & 2) switch. These modes are controlled by changing the value of the resistor. The equations are:


[[image:phototransistor modes.png|300px]]
[[image:phototransistor modes.png]]


''Fairchild recommends a 5kohm resistor or greater to use as a switch''
''Fairchild recommends a 5kohm resistor or greater to use as a switch''

Revision as of 15:19, 6 July 2006

Phototransistors

Phototransistor amplifiers.png

Phototransistors are transistors with the base terminal exposed. Instead of applying a voltage to the base, the photons from striking light activate the transistor.


The phototransistor can be used in two different modes: 1) active & 2) switch. These modes are controlled by changing the value of the resistor. The equations are:

Phototransistor modes.png

Fairchild recommends a 5kohm resistor or greater to use as a switch

  • Switch Mode - when operating as a switch, the transistor can be switched between the cut-off ("off") and saturated ("on") states. This means that when light strikes the phototransistor, it will conduct. Otherwise, it will insulate.
  • Active Mode - In active mode, the output of the transistor is proportional to the intensity of the light.

References