PIC32MX: Interfacing with Force Sensors from a Scale

From Mech
Revision as of 01:24, 9 February 2010 by JoshuaPeng (talk | contribs) (→‎Code)
Jump to navigationJump to search

Original Assignment

Do not erase this section!

Your assignment is to use four analog inputs to continuously read four force sensors taken from a bathroom scale, and to display them on a PC screen as bars whose length corresponds to the force at the sensors. You will use Processing for the PC data acquisition and graphics.

Overview

Summarize briefly what the page is about.

Circuit

Include a schematic and give any part numbers. A photo of your circuit is OK, but not as a replacement for a schematic.

Code

Where possible, make it a single piece of well-commented cut-and-pastable code, or at least make each function that way, so others can easily copy it. Most comments should be in the code itself; outside the code (on the wiki) should only be explanatory comments that are too cumbersome to include in the code.

C code

The purpose of this code is to take the input signals (amplified voltage differences) from the 4 individual force sensors on the scale and output a string of 4 floats separated by spaces ending with a new line. This string will be sent out using RS232 and deciphered by Processing.

"main.c"

Header

/* 
	Team 26: Tod Reynolds, Pill Park, Joshua Peng
	Lab5: PIC32MX: Interfacing with Force Sensors from a Scale

        The purpose of this code is to take the input signals which are amplified voltage differences
        from the 4 individual force sensors on the scale and output a string of 4 floats separated by
        spaces ending with a new line.  This string will be sent out using RS232 and deciphered by Processing.
*/

Includes

#include "HardwareProfile.h"

Constants

#define TRUE 		1
#define FALSE		0

#define DESIRED_BAUDRATE    	(19200)      // The desired BaudRate 
#define NUM_DATA_POINTS 4					 // Number of data points being sent to PC, 4 input sensors

Function Declarations

void initUART2(int pbClk); 		//Initialize RS232

void sendDataRS232(void);		//Function to send RS232

void initADC();					//Initializes ADC

Global Variables

char RS232_Out_Buffer[32];

short int top_left;
short int top_right;
short int bottom_left;
short int bottom_right;
volatile unsigned char data;


short int top_left_initial;
short int top_right_initial;
short int bottom_left_initial;
short int bottom_right_initial;

Main Function

int main(void)
{
	int	pbClk;

	// This line of code only needs to be used if your pins are Analog Input (B port)
    AD1PCFG = 0xFFFF;
		
	// Configure the proper PB frequency and the number of wait states
	pbClk = SYSTEMConfigPerformance(SYS_FREQ);
		
	// Allow vector interrupts
	INTEnableSystemMultiVectoredInt();
	//initInterruptController();
	mInitAllLEDs();
	initUART2(pbClk);
	initADC();
	
	while(1)
	{
/*
// read in each ADC pin
	top_left= ReadADC10(0);
	top_right= ReadADC10(1);
	bottom_left= ReadADC10(2);
	bottom_right= ReadADC10(3);*/

	top_left= ReadADC10(0)-top_left_initial;
	top_right= ReadADC10(1)-top_right_initial;
	bottom_left= ReadADC10(2)-bottom_left_initial;
	bottom_right= ReadADC10(3)-bottom_right_initial;


    if (top_left != 0) {
	mLED_0_On();
	}
	else if (top_left == 0) {
	mLED_0_Off();
	}	
	if (top_right != 0){
	mLED_1_On();
 	} 
	else if (top_right == 0) {
	mLED_1_Off();
	}
	if(bottom_left != 0){
	mLED_2_On();
	}
	else if (bottom_left == 0) {
	mLED_2_Off();
	}
	if(bottom_right != 0){
	mLED_3_On();
	}
	else if (bottom_right == 0) {
	mLED_3_Off();
	}

//Send to PC via RS232
	sendDataRS232();
	}

} //end main

'Interrupt Handlers

void __ISR(_UART2_VECTOR, ipl2) IntUart2Handler(void)
{
	char data;

	// Is this an RX interrupt?
	if(mU2RXGetIntFlag())
	{
		// Clear the RX interrupt Flag
	    mU2RXClearIntFlag();
	
		data = ReadUART2();
		// Echo what we just received.
		//putcUART2(data);
		
		switch(data)
		{

			case 'p':
				top_left_initial=ReadADC10(0);
				top_right_initial=ReadADC10(1);
				bottom_left_initial=ReadADC10(2);
				bottom_right_initial=ReadADC10(3);
				break;

		}
				
 
		// Toggle LED to indicate UART activity
		mLED_0_Toggle();
 
	}

	// We don't care about TX interrupt
	if ( mU2TXGetIntFlag() )
	{
		mU2TXClearIntFlag();
	}
}

Other Functions

Function to Initialize serial port

void initUART2(int pbClk)
{
	 // define setup Configuration 1 for OpenUARTx
 		// Module Enable 
 		// Work in IDLE mode 
 		// Communication through usual pins 
 		// Disable wake-up 
 		// Loop back disabled 
 		// Input to Capture module from ICx pin 
 		// no parity 8 bit 
 		// 1 stop bit 
 		// IRDA encoder and decoder disabled 
 		// CTS and RTS pins are disabled 
 		// UxRX idle state is '1' 
 		// 16x baud clock - normal speed
 	#define config1 	UART_EN | UART_IDLE_CON | UART_RX_TX | UART_DIS_WAKE | UART_DIS_LOOPBACK | UART_DIS_ABAUD | UART_NO_PAR_8BIT | UART_1STOPBIT | UART_IRDA_DIS | UART_DIS_BCLK_CTS_RTS| UART_NORMAL_RX | UART_BRGH_SIXTEEN
	 
	 // define setup Configuration 2 for OpenUARTx
	 	// IrDA encoded UxTX idle state is '0'
	 	// Enable UxRX pin
	 	// Enable UxTX pin
	 	// Interrupt on transfer of every character to TSR 
	 	// Interrupt on every char received
	 	// Disable 9-bit address detect
	 	// Rx Buffer Over run status bit clear
	 #define config2		UART_TX_PIN_LOW | UART_RX_ENABLE | UART_TX_ENABLE | UART_INT_TX | UART_INT_RX_CHAR | UART_ADR_DETECT_DIS | UART_RX_OVERRUN_CLEAR	
 
 	// Open UART2 with config1 and config2
 	OpenUART2( config1, config2, pbClk/16/DESIRED_BAUDRATE-1);	// calculate actual BAUD generate value.
 		
 	// Configure UART2 RX Interrupt with priority 2
 	ConfigIntUART2(UART_INT_PR2 | UART_RX_INT_EN);
}

//Funtion initialization to send RS232
void sendDataRS232()
{
	
	sprintf(RS232_Out_Buffer,"%d %d %d %d\n",top_left, top_right, bottom_left, bottom_right);
	putsUART2(RS232_Out_Buffer);
}

Function to initialize ADC

void initADC()
{  
// Configure the proper PB frequency and the number of wait states
	SYSTEMConfigPerformance(SYS_FREQ);

	// configure and enable the ADC
	CloseADC10();	// ensure the ADC is off before setting the configuration

	// define setup parameters for OpenADC10
				// Turn module on | output in integer | trigger mode auto | enable  autosample
	#define PARAM1  ADC_MODULE_ON | ADC_FORMAT_INTG | ADC_CLK_AUTO | ADC_AUTO_SAMPLING_ON

	// define setup parameters for OpenADC10
			    // ADC ref external | disable offset test | enable scan mode | perform 4 samples | use one buffer | use MUXA mode
	#define PARAM2  ADC_VREF_AVDD_AVSS | ADC_OFFSET_CAL_DISABLE | ADC_SCAN_ON | ADC_SAMPLES_PER_INT_4 | ADC_ALT_BUF_OFF | ADC_ALT_INPUT_OFF

	// define setup parameters for OpenADC10
	// use ADC internal clock | set sample time
	#define PARAM3  ADC_CONV_CLK_INTERNAL_RC | ADC_SAMPLE_TIME_15

	// define setup parameters for OpenADC10
				// set AN1 thru AN4
	#define PARAM4	ENABLE_AN1_ANA | ENABLE_AN2_ANA | ENABLE_AN3_ANA | ENABLE_AN4_ANA

	// define setup parameters for OpenADC10
	// do not assign channels to scan
	#define PARAM5	SKIP_SCAN_AN0 | SKIP_SCAN_AN5 | SKIP_SCAN_AN6 | SKIP_SCAN_AN7 | 
         SKIP_SCAN_AN8 | SKIP_SCAN_AN9 | SKIP_SCAN_AN10 | SKIP_SCAN_AN11 | SKIP_SCAN_AN12 | SKIP_SCAN_AN13 | SKIP_SCAN_AN14 | SKIP_SCAN_AN15

	// use ground as neg ref for A 
	SetChanADC10( ADC_CH0_NEG_SAMPLEA_NVREF); 
	OpenADC10( PARAM1, PARAM2, PARAM3, PARAM4, PARAM5 ); // configure ADC using parameter define above

	EnableADC10(); // Enable the ADC

	while ( ! mAD1GetIntFlag() ) { } // wait for the first conversion to complete so there will be valid data in ADC result registers
}	


Processing Code

The Processing portion of our lab involves 4 main sections, (these parts output something displayed in the Processing window):

1. Colorbars, colorbars();

continuously displaying the force applied onto each force sensor by using 4 bars that will grow or shrink depending on the amplitude of mass (force). The bars will also show the amplitude of the mass by changing colors. When 0 or little force is applied, then corresponding bar is black colored, at the max force, the bar is orchid (pink) colored.

2. XY-Plot, xyplot();

continuously displays the x- and y- position of the center of balance calculated between all 4 sensors with a dot on a xy-coordinate plane. So, if the person shifts his weight to the right side of scale, then the dot will move to the right in the x direction. If the person shifts his weight to the front of the sensor, then the dot will move up in the y direction.

3. X-position vs. Time (not a separate function)

continuously plots a dot for the x-position along a time axis. This plot will be useful to see how much the person shifts his/her weight to the left or right (sagittal plane) over time. Due to the window size and the speed of processing, the points will be plotted over a time period of about 20 seconds.

4. Y-position vs. time (not a separate function)

continuously plots a dot for the y-position along a time axis. This plot will be useful to see how much the person shifts his/her weight forward or backwards (coronal or frontal plane) over time. The code for this section is essentially the same as the x-position but edited to show y-position.


Important Functions that do not output something displayed in the Processing window:

1. Communication between the PC (Processing) and the PIC via RS232, void initSerial();

The purpose of InitSerial(); is to open a serial port on the PC and communicate with the PIC32. The code found here is essentially a modification of the ME333 Lab 4: Motor Control Processing code written by Nick Marchuk.

2. X-position, float xposition();

Calculates the x-position based on the contribution of each force sensor output and returns the resulting float value.

3. Y-position, float yposition();

Calculates the y-position based on the contribution of each force sensor output and returns the resulting float value.


General Notes:

Our code was written with the assumption that the inputs from the PIC (that initially comes from the 4 force sensors) will come in the form of a 4x1 array. It does not actually arrive in that form from the PIC, it actually arrives as a string of floats separated by spaces ending with a new line. The new line is deleted and the floats are extracted out, normalized between 0-255, and put into the "mass" array. All of the normalization, window dimension parameters, rectangle dimensions, etc. were set up with the 0-255 range and 1000x700 window size in mind. So if the values are not between 0-255 or the window size is altered, almost all of following code will be messed up. The x-position vs. time and y-position vs. time plots are not implemented as independent functions. The code for these plots are found at the very end of colorbars();.


"lab5.pde"

Initial Comments

/****************************************************
Team 26: Tod Reynolds, Pill Park, Joshua Peng
ME333 Intro to Mechatronics
Lab 5: PIC32MX: Interfacing with Force Sensors from a Scale

The following Processing code will extract values from the PIC using RS232 and store them in a 4x1 array 
with a range of 0-255 and generate 4 plots.  A portion of the code will then execute x- and y-position 
calculations, normalize these points, and generate continuous data points to be displayed in the plots in the 
Processing window.   Four bars will change in height and color according to the force (mass) exerted on the 
respective force sensor.  The distribution of force across the scale (center of balance) will be displayed 
in a xy-coordinate plane.  Two additional plots will display the x-position and y-position over a time 
period of about 20 seconds.
****************************************************/

Global Variables

 //initialization of the serial variable that will hold the values sent from the PIC via RS232
 import processing.serial.*; 
 Serial[] myPorts = new Serial[1];

 //the PIC will output 4 floats and we will first store the values into these 4 variables
 float input0;
 float input1;
 float input2;
 float input3;

 //dimensions of our window will be 1000x700
 float window_height = 700;
 float window_width = 1000;
 PFont fontA;  //initializing our text font

 //the main "mass" 4x1 array that holds the values continuously sent from the 4 force sensors
 //we will refer to this array as the "mass array" in our comments
 float[] mass = new float[4]; 

 //window dimension variable that is used to make the bargraph.  The bx and by variables are
 //used so that the bargraph section could be more easily formatted in case we change the
 //window size.
 float bx = window_width/2/8;
 float by = window_height/2/8;
 int index;  

 //color variables used to indicate the amplitude of the force applied to each sensor
 color c0;
 color c1;
 color c2;
 color c3;

// buttons
ImageButtons button_p;

Main Setup Function

void setup() {
  
  index = 0;
  InitSerial();
  smooth();

  //splitting the window into 5 separate areas and filling them with a 102 gray color
  size(int(window_width),int(window_height));
  fill(102);
  rect(0,0,window_width/2,window_height/3);
  fill(102);
  rect(0,window_height/3,window_width/2,window_height/3);
  fill(102);
  rect(0,window_height*2/3,window_width/2,window_height/3);
  fill(102);
  rect(window_width/2,0,window_width/2,window_height/2);
  fill(102);
  rect(window_width/2,window_height/2,window_width/2,window_height/2);

  //filling inside of the x-position vs. time and y-position vs. time plots with white color
  fill(255);
  rect(25, int(window_height/3)+29, int(window_width/2)-49, int(window_height/3)-59);
  fill(255);
  rect(25, int(window_height*2/3)+29, int(window_width/2)-49, int(window_height/3)-59);

  // Define and create image button
  PImage b = loadImage("base_p.jpg");
  PImage r = loadImage("roll_p.jpg");
  PImage d = loadImage("down_p.jpg");
  int x = 20;
  int y = 100; 
  int w = b.width;
  int h = b.height;
  char c = 'p';
  button_p = new ImageButtons(x, y, w, h, b, r, d, c);
  
}

Main Draw Function

void draw() {
  
  //when we first tried to see if each of the 4 parts in our code worked, we assigned the mass array to pick
  //up the cursor position in the window.  
  /*
  mass[0] = ((1000-mouseX)/7.84314)+((700-mouseY)/5.4902);
  mass[1] = (mouseX/7.84314)+((700-mouseY)/5.4902);
  mass[2] = ((1000-mouseX)/7.84314)+(mouseY/5.4902);
  mass[3] = (mouseX/7.84314)+(mouseY/5.4902);
  */

  button_p.update();
  button_p.display();

  //initializing font we want to use
  fontA = loadFont("Calibri-Bold-16.vlw");
  textFont(fontA);
  
  /*calling our xy-plot and colorbars functions.  The x-position vs. time and y-position vs. time plots 
    are not actually separate functions.  They are a short section of code found at the very end of the 
    colorbars function.  In order to make the x-position vs. time and y-position vs. time plots work we 
    needed variables found only in colorbars.
  */
  xyplot();
  colorbars();
}

Communication between the PC (Processing) and the PIC via RS232

void InitSerial() {        
  // initialize the serial port
  // List all the available serial ports
  // you want the one that you plugged in
  println(Serial.list());

  String portList = Serial.list()[0];
  // this assumes the COM port you want is the first one, change the 0 to the place of your comport in the list that appears in the debug window
  myPorts[0] = new Serial(this, portList, 19200);

  // read bytes into a buffer until you get a linefeed (ASCII 10):
  myPorts[0].bufferUntil('\n');
}

// serial event, check which port generated the event, just in case there are more than 1 ports open
void serialEvent(Serial thisPort) { 
  // variable to hold the number of the port:
  int portNumber = -1;

  // iterate over the list of ports opened, and match the 
  // one that generated this event:
  for (int p = 0; p < myPorts.length; p++) {
    if (thisPort == myPorts[p]) {
      portNumber = p;
    }
  }

  // read the serial buffer until a newline appears
  String myString = thisPort.readStringUntil('\n');

  // if you got any bytes other than the newline
  if (myString != null) {
    
    myString = trim(myString); // ditch the newline

    // split the string at the spaces, save as integers
    float line_received[] = float(split(myString, ' '));

    // grab the data
    if ((line_received.length == 4) && (portNumber==0)){
      if (index >= 4){
        index = 0;
      }
      /*setting the ranges for the values received to be between 0-255, then
      putting those values into our mass array

      Right now, we are using a intermediate variable (inputx) to carry
      the value to the mass array just incase we need a variable to edit
      without having to edit the mass array values.
      */
      input0 = map(line_received[0],-1000,1000,510,0);
      input1 = map(line_received[1],-1000,1000,510,0);
      input2 = map(line_received[2],-1000,1000,510,0);
      input3 = map(line_received[3],-1000,1000,510,0);
      
      if (input0 < 0) {
        mass[0] = 0;
      }
      else if (input0 >= 0) {
        mass[0] = input0;
      }
      if (input1 < 0) {
        mass[1] = 0;
      }
      else if (input1 >= 0) {
        mass[1] = input1;
      }
      if (input2 < 0) {
        mass[2] = 0;
      }
      else if (input2 >= 0) {
        mass[2] = input2;
      }
      if (input3 < 0) {
        mass[3] = 0;
      }
      else if (input3 >= 0) {
        mass[3] = input3;
      }
      index++;
    }
  }
} // end serialEvent

XY-Plot

void xyplot(){
  
  //setting xy-plot window dimensions, plotting x-axis and y-axis lines, and plotting the actual point that
  //moves around in the xy-coordinate plane
  float sizeofwindow = window_width/2-2*window_width/10;
  float j = 510;
  fill(255);
  strokeWeight(1);
  rect(window_width/2+window_width/10,window_height/2+window_height/28,sizeofwindow,sizeofwindow);
  strokeWeight(1);
  stroke(75);
  line(.75*window_width, window_height/2+window_height/28, .75*window_width, window_height-window_height/28);
  line(window_width/2+window_width/10, .75*window_height, window_width-window_width/10, .75*window_height);
  float x = (sizeofwindow/j)*xposition();
  float y = (sizeofwindow/j)*yposition();
  stroke(c3);
  fill(0);
  strokeWeight(5);
  point(x+window_width*3/4,y+window_height*3/4);
  strokeWeight(1);

  //displaying text and titles, note that titles may be different than just "colorbars" and "xy-plot,"
  //but they are the same thing.  
  fill(0);
  text("Team 26: Tod Reynolds, Pill Park, Joshua Peng", 4, 16);
  text("Lab 5: PIC32MX: Interfacing with Force Sensors from a Scale", 4, 36);
  text("Mass Amplitude Colorbars", window_width/2+5, 16);
  text("Center of Balance Plot", window_width/2+5, window_height/2+16);
  text("X-position", window_width*3/4-window_width/23,window_height-10);
  text("Y-position", window_width/2+15, window_height*3/4);
  text("Sagittal Shift / Time", 5, window_height/3+16);
  text("Coronal Shift / Time", 5, window_height*2/3+16);
  text("left", (window_width/4)-15, window_height/3+26);
  text("forward", (window_width/4)-30, window_height*2/3+26);
  text("right", (window_width/4)-20, window_height*2/3-16);
  text("backward", (window_width/4)-35, window_height-16);
}

X-position

float xposition(){

//xposition(); returns a float value that specifies the x-position for the 
//xy-plot, x-position vs. time, and y-position vs. time plots
  float L;
  float R;
  float Xpos;
  L = (mass[0]+mass[2])/2;
  R = (mass[1]+mass[3])/2;
  Xpos = R-L;
  return Xpos; 
}

Y-position

float yposition(){

//yposition(); returns a float value that specifies the y-position for the 
//xy-plot, x-position vs. time, and y-position vs. time plots
  float T;
  float B;
  float Ypos;
  T = (mass[0]+mass[1])/2;
  B = (mass[2]+mass[3])/2;
  Ypos = B-T;
  return Ypos;
}

Colorbars

void colorbars()
{
  float x = window_width/2;
  float y = 0;

  //initializing lots of variables to hold values for the mass array, rectangle positions, and color
  float s0 = mass[0];
  float s1 = mass[1];
  float s2 = mass[2];
  float s3 = mass[3];
  color r0;
  color r1;
  color r2;
  color r3;

  //the 9 colors with rgb values that we will transition through as the mass amplitude increases
  color black = color(0, 0, 0);
  color plum = color(68, 0, 51);
  color navy = color(0, 0, 128);
  color sky = color(0, 191, 255);
  color lime = color(127, 255, 0);
  color sun = color(255, 255, 0);
  color fire = color(250, 140, 0);
  color tomato = color(255, 0, 0);
  color orchid = color(199, 21, 133);

  //text labels incase we want to label the mass amplitude values  
  /*
  String str0 = "Left Top Sensor Mass: "; 
  String str1 = "Right Top Sensor Mass: "; 
  String str2 = "Left Bottom Sensor Mass: "; 
  String str3 = "Right Bottom Sensor Mass: "; 
  */

  /*the next section of code creates color intervals and the colorbars.  Since we are assuming 
    that each of the 4 floats in the mass array will be values between 0-255, we created 8 intervals 
    for color interpolation.  Each interval is 32 points long, so in total we will have 256 points
    (8x32 = 256).  
    
    The 8 intervals are:
    black to plum (0-31)
    plum to navy (32-63)
    navy to sky (64-95)
    sky to lime (96-127)
    lime to sun (128-159)
    sun to fire (160-191)
    fire to tomato (192-223)
    tomato to orchid (224-255)
    
    Colorbars are rectangles with a width of (window_width/4) and a height varying according to the mass amplitude.  
    The max height is (window_height/4).  Since the PIC is continuously sending different values in, this section of
    code (that is called in draw();) is run over and over again, as if in a infinite loop.  The general algorithm for 
    the colorbars is first to "erase" the last rectangle by plotting a rectangle filled with the background color
    and with no stroke, and then to plot a new rectangle on top.  This "erasing" is so that you do not see the last rectangle 
    behind the current rectangle.
  */
  
  //sensor0 colorbars
  //please note that this next section of code is basically repeated 3 more times to create 3 more bars
  if (s0 <= 31) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(black, plum, s0/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 63) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(plum, navy, (s0-32)/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 95) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(navy, sky, (s0-63)/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 127) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(sky, lime, (s0-95)/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 159) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(lime, sun, (s0-127)/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 191) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(sun, fire, (s0-159)/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 223) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(fire, tomato, (s0-191)/32);
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  else if (s0 <= 255) {
    noStroke();
    fill(102);
    rect((x+bx), 40, bx*2.1, by*3);
    c0 = lerpColor(tomato, orchid, (s0-223)/32); 
    stroke(0);
    fill(c0);
    rect((x+bx), (3*by)-(2*by)*(mass[0]/255), bx*2, (2*by)*(mass[0]/255));
  }
  
  //sensor1 colorbars
  if (s1 <= 31) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(black, plum, s1/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 63) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(plum, navy, (s1-32)/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 95) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(navy, sky, (s1-63)/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 127) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(sky, lime, (s1-95)/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 159) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(lime, sun, (s1-127)/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 191) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(sun, fire, (s1-159)/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 223) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(fire, tomato, (s1-191)/32);
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  else if (s1 <= 255) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 40, bx*2.1, by*3);
    c1 = lerpColor(tomato, orchid, (s1-223)/32); 
    stroke(0);
    fill(c1);
    rect((x+(bx*5)), (3*by)-(2*by)*(mass[1]/255), bx*2, (2*by)*(mass[1]/255));
  }
  
  //sensor2 colorbars
  if (s2 <= 31) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(black, plum, s2/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 63) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(plum, navy, (s2-32)/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 95) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(navy, sky, (s2-63)/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 127) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(sky, lime, (s2-95)/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 159) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(lime, sun, (s2-127)/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 191) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(sun, fire, (s2-159)/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 223) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(fire, tomato, (s2-191)/32);
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  else if (s2 <= 255) {
    noStroke();
    fill(102);
    rect((x+bx), 4*by, bx*2.1, 3*by);
    c2 = lerpColor(tomato, orchid, (s2-223)/32); 
    stroke(0);
    fill(c2);
    rect((x+bx), (7*by)-(2*by)*(mass[2]/255), bx*2, (2*by)*(mass[2]/255));
  }
  
  //sensor3 colorbars
  if (s3 <= 31) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(black, plum, s3/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 63) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(plum, navy, (s3-32)/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 95) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(navy, sky, (s3-63)/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 127) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(sky, lime, (s3-95)/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 159) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(lime, sun, (s3-127)/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 191) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(sun, fire, (s3-159)/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 223) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(fire, tomato, (s3-191)/32);
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  else if (s3 <= 255) {
    noStroke();
    fill(102);
    rect((x+(bx*5)), 4*by, bx*2.1, 3*by);
    c3 = lerpColor(tomato, orchid, (s3-223)/32); 
    stroke(0);
    fill(c3);
    rect((x+(bx*5)), (7*by)-(2*by)*(mass[3]/255), bx*2, (2*by)*(mass[3]/255));
  }
  
  //displaying text for mass
  /*
  PFont font;
  font = loadFont("Calibri-18.vlw"); 
  textFont(font, 18);
  fill(0);
  text(str0, x+bx, 3.1*by, 300, 30);
  text(str1, x+(bx*5), 3.1*by, 300, 30);
  text(str2, x+bx, 7.1*by, 300, 30);
  text(str3, x+(bx*5), 7.1*by, 300, 30);
  */
  
  //displaying the mass amplitude values.  We are also using a grayed-out rectangle to erase the previous text here
  noStroke();
  fill(102);
  rect(x+bx, 3.5*by, bx*2.1, -12);
  fill(0);
  text(s0, x+bx, 3.5*by);
  fill(102);
  rect(x+(bx*5), 3.5*by, bx*2.1, -12);
  fill(0);
  text(s1, x+(bx*5), 3.5*by);
  fill(102);
  rect(x+bx, 7.5*by, bx*2.1, -12);
  fill(0);
  text(s2, x+bx, 7.5*by);
  fill(102);
  rect(x+(bx*5), 7.5*by, bx*2.1, -12);
  fill(0);
  text(s3, x+(bx*5), 7.5*by);

Creating color references next to the colorbars (found within colorbars();)

  //color references, these are guides next to the colorbars to show what colors to expect at certain
  //mass amplitudes.  These references are 5 pixels wide and 88 pixels long and similarly have 8 intervals 
  //for color interpolation.

  for (float i=0; i<=87; i++) {
    if (i <= 10) {
      r0 = lerpColor(black, plum, i/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 21) {
      r0 = lerpColor(plum, navy, (i-10)/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 32) {
      r0 = lerpColor(navy, sky, (i-21)/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 43) {
      r0 = lerpColor(sky, lime, (i-32)/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 54) {
      r0 = lerpColor(lime, sun, (i-43)/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 65) {
      r0 = lerpColor(sun, fire, (i-54)/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 76) {
      r0 = lerpColor(fire, tomato, (i-65)/11);
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    }
    else if (i <= 87) {
      r0 = lerpColor(tomato, orchid, (i-76)/11); 
      stroke(r0);
      line((3*bx+10+window_width/2), (by*3)-i, (3*bx)+15+window_width/2, (by*3)-i);
      line((7*bx+10+window_width/2), (by*3)-i, (7*bx)+15+window_width/2, (by*3)-i);
      line((3*bx+10+window_width/2), (by*7)-i, (3*bx)+15+window_width/2, (by*7)-i);
      line((7*bx+10+window_width/2), (by*7)-i, (7*bx)+15+window_width/2, (by*7)-i);
    } 
  }
    //creating an outline around the color references  
    noFill();
    stroke(0);
     rect((3*bx+9+window_width/2), (by*3), 7, -88);
      rect((7*bx+9+window_width/2), (by*3), 7, -88);
      rect((3*bx+9+window_width/2), (by*7), 7, -88);
      rect((7*bx+9+window_width/2), (by*7), 7, -88);
 

X-position vs. time and Y-position vs. time plots section found inside colorbars();

  
   /*x-position vs time plot 
   
     we use the same calculations as in the xposition(); and yposition();.  We are
     also using the "erasing rectangle" algorithm in plotting points.  The speed of dot-plotting (according to the 
     x-position) is the speed the computer can run through draw(); because a dot is plotted each time the code for 
     this section is processed.  After a dot is plotted, a rectangle including that dot is copied and moved to the 
     right 1 dot-width to the right.  The original dot is erased with a erasing rectangle 1 dot-width long.  Then,
     the next dot is plotted where the last dot was originally plotted (at the very left of the window) when this 
     section of code is run through again.
   */  
     stroke(max(c0,c2));
     float L;
     float R;
     float Xpos;
     L = (mass[0]+mass[2])/2;
     R = (mass[1]+mass[3])/2;
     Xpos = R-L;
     strokeWeight(4);
     point(29,(Xpos/3.04)+window_height/2);
     strokeWeight(1);
     copy(27, int(window_height/3)+30, int(window_width/2)-54, int(window_height/3)-60, 30, 
          int(window_height/3)+30, int(window_width/2)-54, int(window_height/3)-60); 
     fill(255); 
     noStroke(); 
     rect(26, int(window_height/3)+30, 4, int(window_height/3)-60);
   
   //y-position vs time plot
     stroke(max(c0,c1));
     float T;
     float B;
     float Ypos;
     T = (mass[0]+mass[1])/2;
     B = (mass[2]+mass[3])/2;
     Ypos = B-T;
     strokeWeight(4);
     point(29,(Ypos/3.04)+window_height*0.8333);
     strokeWeight(1);
     copy(27, int(window_height*2/3)+30, int(window_width/2)-54, int(window_height/3)-60, 30, 
          int(window_height*2/3)+30, int(window_width/2)-54, int(window_height/3)-60); 
     fill(255); 
     noStroke(); 
     rect(26, int(window_height*2/3)+30, 4, int(window_height/3)-60);
  
    //midline for x-position vs. time, and y-position vs. time plots 
    stroke(75);
    line(26, int(window_height*0.8333), int(window_width/2)-25, int(window_height*0.8333));
    line(26, int(window_height/2), int(window_width/2)-25, int(window_height/2));    
}

Displaying the button to zero out our force sensors

class Button
{
  int x, y;
  int w, h;
  color basecolor, highlightcolor;
  color currentcolor;
  boolean over = false;
  boolean pressed = false;   
  
  void pressed() {
    if(over && mousePressed) {
      pressed = true;
    } else {
      pressed = false;
    }    
  }
  
  boolean overRect(int x, int y, int width, int height) {
  if (mouseX >= x && mouseX <= x+width && 
      mouseY >= y && mouseY <= y+height) {
    return true;
  } else {
    return false;
  }
}
}

class ImageButtons extends Button 
{
  PImage base;
  PImage roll;
  PImage down;
  PImage currentimage;
  char send_char;

  ImageButtons(int ix, int iy, int iw, int ih, PImage ibase, PImage iroll, PImage idown, char isend_char) 
  {
    x = ix;
    y = iy;
    w = iw;
    h = ih;
    base = ibase;
    roll = iroll;
    down = idown;
    currentimage = base;
    send_char = isend_char;
  }
  
  void update() 
  {
    over();
    pressed();
    if(pressed) {
      currentimage = down;
      myPorts[0].write(send_char);
    } else if (over){
      currentimage = roll;
    } else {
      currentimage = base;
    }
  }
  
  void over() 
  {
    if( overRect(x, y, w, h) ) {
      over = true;
    } else {
      over = false;
    }
  }
  
  void display() 
  {
    image(currentimage, x, y);
  }
}