Difference between revisions of "PIC32MX: Interfacing with Force Sensors from a Scale"
(New page: == Original Assignment == '''Do not erase this section!''' Your assignment is to == Overview == Summarize briefly what the page is about. == Circuit == Include a schematic and give a...) |
|||
| Line 3: | Line 3: | ||
'''Do not erase this section!''' |
'''Do not erase this section!''' |
||
Your assignment is to use four analog inputs to continuously read four force sensors taken from a bathroom scale, and to display them on a PC screen as bars whose length corresponds to the force at the sensors. You will use Processing for the PC data acquisition and graphics. |
|||
Your assignment is to |
|||
== Overview == |
== Overview == |
||
Revision as of 19:44, 27 January 2010
Original Assignment
Do not erase this section!
Your assignment is to use four analog inputs to continuously read four force sensors taken from a bathroom scale, and to display them on a PC screen as bars whose length corresponds to the force at the sensors. You will use Processing for the PC data acquisition and graphics.
Overview
Summarize briefly what the page is about.
Circuit
Include a schematic and give any part numbers. A photo of your circuit is OK, but not as a replacement for a schematic.
Code
Where possible, make it a single piece of well-commented cut-and-pastable code, or at least make each function that way, so others can easily copy it. Most comments should be in the code itself; outside the code (on the wiki) should only be explanatory comments that are too cumbersome to include in the code.
