NU32v2: Benchmark Test
*** UNDER CONSTRUCTION ***
Benchmarking is a useful tool in testing how fast a processor can run. With the PIC32, we are primarily interested in seeing how fast its CPU can perform mathematical operations.
Overview
Add high-level overview of CPU, including:
- The processor executes instructions in an assembly line fashion similar to how cars are assembled. In any given clock cycle, the processor could be executing several instructions at once (each instruction occupying a different stage in the assembly line of course). One issue that commonly arises is when assembly instruction $i$ needs the result of instruction $i-1$ (where $i-1$ is one stage ahead of $i$), but the processor has not yet finished computing the result of $i-1$. Unfortunately, the processor has no choice but to stall instruction $i$ until the value for $i-1$ becomes available. Your timing results will include both the time to execute an instruction and any processor stalls.
- One clock cycle is 1/SYSFREQ and as instructions pass through the processor's ``assembly line at 80MHz, the processor is eventually able to complete one instruction every 12.5ns. Therefore, for all intensive purposes, you can pretend that one line of computer assembly code takes one cycle to compelete.
- The PIC has no hardware to compute floating-point operations. This piece of hardware is known as a floating point unit or FPU. The calculations are instead performed in software.
Details
The common arithmetic operators, multiplication (*), division(/), addition (+), and subtraction (-) were tested on the PIC32. Because timing results can vary depending on which C data type (char, short, int, long long, float, and double) is used, the final table includes the number of cycles a particular operator and data type pair took to compute. The table below is taken from a student who took ME 333 in the Winter 2011 term. The values, in cycles, are representative of what the class got as a whole.
| char | short | int | long long | float | double | |
| add (+) | 5 | 5 | 5 | 12 | 68 | 102 |
| sub (-) | 5 | 5 | 5 | 10 | 79 | 123 |
| mult (*) | 7 | 7 | 7 | 23 | 56 | 106 |
| div (/) | 16 | 16 | 16 | 119 | 149 | 314 |
A small subset of the built-in mathematical functions defined in <math.h> were also tested. The values, as in the previous table, are in cycles.
| sinf | 263 |
| sin | 647 |
| sqrtf | 293 |
| sqrt | 603 |
