Difference between revisions of "NU32 Electronics and Mechatronics Kits"

From Mech
Jump to navigationJump to search
Line 1: Line 1:
To complete projects in the book [[NU32|"Embedded Computing and Mechatronics with the PIC32 Microcontroller"]] (Lynch/Marchuk/Elwin, Newnes 2015), we recommend purchasing the following parts.
To complete projects in the book [[NU32|"Embedded Computing and Mechatronics with the PIC32 Microcontroller"]] (Lynch/Marchuk/Elwin, Newnes 2015), we recommend purchasing the following parts.



==Minimum Electronics Kit==
==Minimum Electronics Kit==
Line 10: Line 11:
* [http://www.digikey.com/product-detail/en/WP7113SRC%2FDU/754-1274-ND/1747673 Kingbright WP7113SRC/DU red LED]] (or any bright red LED, wavelength around 650 nm)
* [http://www.digikey.com/product-detail/en/WP7113SRC%2FDU/754-1274-ND/1747673 Kingbright WP7113SRC/DU red LED]] (or any bright red LED, wavelength around 650 nm)
You might also consider [https://www.sparkfun.com/products/13698 a kit of basic electronic parts] for further exploration.
You might also consider [https://www.sparkfun.com/products/13698 a kit of basic electronic parts] for further exploration.



==The Brushed DC Motor Control Kit==
==The Brushed DC Motor Control Kit==
Line 19: Line 21:
* a motor mount to mount the motor securely to the table
* a motor mount to mount the motor securely to the table
* an inertia bar to attach to the motor to vary its load
* an inertia bar to attach to the motor to vary its load



==Optional Components with Source Code==
==Optional Components with Source Code==
Line 29: Line 32:
* [http://www.digikey.com/product-detail/en/MCP2562-E%2FP/MCP2562-E%2FP-ND/4079966 Microchip MCP2562 CAN transceiver]
* [http://www.digikey.com/product-detail/en/MCP2562-E%2FP/MCP2562-E%2FP-ND/4079966 Microchip MCP2562 CAN transceiver]
* [http://www.digikey.com/product-search/en?pv69=80&FV=fff40027%2Cfff802d2&k=l6234 L6234 three phase brushless motor driver]
* [http://www.digikey.com/product-search/en?pv69=80&FV=fff40027%2Cfff802d2&k=l6234 L6234 three phase brushless motor driver]



==Other Components Referenced or Used in the Book==
==Other Components Referenced or Used in the Book==

Revision as of 13:04, 18 January 2016

To complete projects in the book "Embedded Computing and Mechatronics with the PIC32 Microcontroller" (Lynch/Marchuk/Elwin, Newnes 2015), we recommend purchasing the following parts.


Minimum Electronics Kit

We recommend this set of parts for simple interfacing with the NU32, as described throughout the book. These are available from many vendors; below are some examples where they can be purchased.

You might also consider a kit of basic electronic parts for further exploration.


The Brushed DC Motor Control Kit

These items are needed to complete the projects associated with a brushed DC motor.

  • a brushed DC motor with no gearhead that draws less than 1 A at stall when powered by 6 V, with an incremental encoder (as many counts per revolution as possible, preferably at least hundreds). No gearhead makes it easier to characterize the motor without having to worry about high friction in the gearhead. You can search surplus and other sites for such motors (e.g., aliexpress.com, ebay.com, etc.). As of January 2016, this Mabuchi RS-385PH motor and 448-line incremental encoder is available on aliexpress for less than 10 USD.
  • a 4xAA battery holder and 4 AA batteries for a 6 V power supply (6 V is not critical; other voltages are possible, provided the motor does not draw much more than about 1 A at stall at this voltage)
  • 20 ohm 5 W power resistor
  • the motor control board, consisting of a TI DRV8835 H-bridge chip, the MAX9918 current-sense amplifier, and a dsPIC33FJ64MC802-I/MM microcontroller that is used to count an encoder and report its count via SPI
  • a motor mount to mount the motor securely to the table
  • an inertia bar to attach to the motor to vary its load


Optional Components with Source Code

The following equipment is used in code samples in the book. Most products are available from many vendors; below are examples.


Other Components Referenced or Used in the Book

These components, referenced in the book, can be sourced from various suppliers: