NU32: What is in the NU32 Kit

From Mech
Revision as of 17:50, 29 December 2011 by NickMarchuk (talk | contribs)
Jump to navigationJump to search
The NU32v2 kit.

The NU32 kit contains everything necessary to begin programming the NU32 board. Check to make sure your kit contains the items listed below.


Components in the kit:


Picture Description Link
The NU32v2
NU32 in 2 breadboards NU32: Software to Install, NU32: Starting a New Project and Putting it on the NU32
USB Cable
1 m USB cable, A male to mini B male Datasheet
9V Power Supply
6V wall power supply, 1A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model xxx from CUI Inc. Datasheet
16x2 Character LCD
LCD, 16x2 characters, using parallel communication Datasheet, NU32: 16x2 LCD
Pushbutton
Momentary NO pushbutton. Datasheet
Resistors A few of the following 1/4W resistors: 100k ohm, 10k ohm, 330 ohm, 100 ohm no link
Capacitors A few of the following capacitors: 0.01uF, no link
Potentiometers A few of the following 1/4W potentiometers: 10k ohm, no link
LEDs Red super bright 5mm LED no link
Phototransistors SFH 310 visible spectrum phototransistor Datasheet


Components from previous courses:

Picture Description Link
Wirestrippers
Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. These will get dull or mashed up if you try to cut anything other than wire Sparkfun wire strippers
Wire
6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue) no link
DVM810 Multimeter
Small multimeter, doesn't have to be this brand. Multimeter, Datasheet
Extra Breadboard
Extra breadboard, 830 tie points. 830 T/P Breadboard or [1]