NU32: What is in the NU32 Kit

From Mech
Revision as of 16:45, 27 December 2011 by NickMarchuk (talk | contribs)
Jump to navigationJump to search
The NU32v2 kit.

The NU32 kit contains everything necessary to begin programming the NU32 board. Check to make sure your bag contains all of the items listed below.


Components in the kit:


Picture Description Link
The NU32v2
NU32 in 2 breadboards NU32: Software to Install, NU32: Starting a New Project and Putting it on the NU32
USB Cable
1 m USB cable, A male to mini B male Datasheet
9V Power Supply
6V wall power supply, 1A, 2.1mm ID x 5.5mm OD, 6W, center positive. Model xxx from CUI Inc. Datasheet
Wirestrippers
Wire strippers, for 30, 28, 26, 24, 22, and 20 AWG wire. Can also be used as pliers and to cut wire. Do not try to cut anything else with these, they will get dull Sparkfun wire strippers
Wire
6 colors of ~6" sections of 22 AWG solid core wire (red, white, yellow, green, black, blue) no link
Nokia 5110 LCD
LCD, 16x2, using xxx communication Nokia 5110, Datasheet, NU32v2: Nokia 5110 LCD
DVM810 Multimeter
Small multimeter, xxx. Multimeter, Datasheet
LED array
10 LED array, green. Datasheet
Resistor array
10 pin, 9 resistor, 330 Ohm common cathode bus. Dot indicates common pin. For use with the LED array. Datasheet
Extra Breadboard
Extra breadboard, 830 tie points. 830 T/P Breadboard
Pushbutton
Momentary NO pushbutton. Datasheet
Resistors A few of the following 1/4W resistors: 100k ohm, 10k ohm, 330 ohm, 100 ohm no link
Capacitors A few of the following capacitors: 0.01uF, no link
Potentiometers A few of the following 1/4W potentiometers: 10k ohm, no link
LEDs Red super bright 5mm LED no link
Phototransistors SFH 310 visible spectrum phototransistor Datasheet