Modern Robotics Errata

From Mech
(Difference between revisions)
Jump to: navigation, search
(34 intermediate revisions by one user not shown)

Revision as of 07:41, 23 November 2017

Please click here to report any corrections for the book. (Please make sure you are using the May 3, 2017, online version of the book, or the hardcover book published by Cambridge University Press.)

Errata below are for the hardcover book published by Cambridge University Press and the preprint version of the book posted on May 3, 2017. Thanks to everyone who provided corrections to earlier versions!


Contents

Significant corrections

Chapter 3

  • In the displayed equation just after Equation (3.76), the left-hand side should be [\mathcal{V}_s] (the brackets are missing).

Chapter 5

  • Equation (5.7): The the first two terms on the right-hand side of the equation should be J_{s1} \dot{\theta}_1 + J_{s2}(\theta) \dot{\theta}_2.
  • Exercise 5.16 and Figure 5.26: The robot is referred to as PRRRRR, but it is PRPRRR.

Chapter 6

  • Chapter 6.3, first line after Eq (6.7): the matrices T_{sd}^{-1} \dot{T}_{sd} and \dot{T}_{sd} T_{sd}^{-1} are referred to as twists, but these are the se(3) matrix representations of the twists.

Chapter 8

  • Figure 8.5 says the volume of the rectangular parallelepiped is abc but it should be hlw.
  • Exercise 8.6(a): The expression \text{ad}_{J_i}(J_j) has the indices switched; the correct expression is \text{ad}_{J_j}(J_i).
  • Exercise 8.7: The expression should be written:


\dot{M} = -\mathcal{A}^{\rm T} \mathcal{L}^{\rm T} \mathcal{W}^{\rm T} [\mbox{ad}_{\mathcal{A} \dot{\theta}}]^{\rm T} \mathcal{L}^{\rm T} \mathcal{GLA} -
\mathcal{A}^{\rm T} \mathcal{L}^{\rm T} \mathcal{GL} [\mbox{ad}_{\mathcal{A} \dot{\theta}}] \mathcal{WLA}

Chapter 10

  • Equation (10.4) should read  u = F(q) - B \dot{q} (the plus sign in the book should be a minus sign).

Chapter 11

  • In the displayed equation after Equation (11.18), the vector Xe(t) is a six-vector. The bottom three elements are written correctly, but the top three elements, an angular velocity, are written instead in their 3x3 so(3) form.
  • Figure 11.24, the Robonaut 2 series elastic actuator, 4th sentence of the caption: The words "outer" and "inner" should be switched, so the new sentence reads "The inner ring of hole mounts connects to the harmonic gearhead output, and the outer ring of hole mounts is the output of the SEA, connecting to the next link."

Minor typos, etc., no danger of misunderstanding

Chapter 1

  • (online version only) Description of Chapter 6: "jont positions" should be "joint positions."

Chapter 2

  • Chapter 2.2.2, Example 2.3: "Substituting" is misspelled.

Chapter 6

  • (online version only) Figure 6.7: θ0 should be θ0 (five times) and θ1 should be θ1 (one time).

Chapter 7

  • Just below caption for Figure 7.8: There is an extraneous dot.

Chapter 8

  • (online version only) Chapter 8.1.1, last paragraph: \dot{\theta}_1 is improperly typeset.

Chapter 12

  • Caption of Figure 12.14, second-to-last sentence: "rotation if possible" should be "rotation is possible."

A partial list of errata contributors

Thanks to the following people who provided corrections, starting from the preliminary version of the book posted in October, 2016:

H. Andy Nam, Eric Lee, Yuchen Rao, Chainatee Tanakulrongson, Mengjiao Hong, Kevin Cheng, Jens Lundell, Elton Cheng, Michael Young, Jarvis Schultz, Logan Springgate, Sofya Akhmametyeva, Aykut Onol, Josh Holcomb, Yue Chen, Mark Shi, AJ Ibraheem, Yalun Wen, Seongjae Jeong, Josh Mehling, Felix Wang, Drew Warren, Chris Miller, Clemens Eppner


Personal tools