Difference between revisions of "Microcontroller PIC32MX460F512L"
From Mech
Jump to navigationJump to searchAndrew Long (talk | contribs) |
Andrew Long (talk | contribs) |
||
| Line 1: | Line 1: | ||
[http://www.sparkfun.com/commerce/product_info.php?products_id=8971 Link to PIC32 Microchip website]. |
|||
{| |
|||
[http://www.schmalzhaus.com/UBW32/ Link to Brian Schmalz UBW32 website.] |
|||
| Family || PIC32MX4xx |
|||
|- |
|||
The UBW32 communicates with the computer via USB. The board can received power via USB or through an external power supply. |
|||
| Max Speed MHz || 80 |
|||
<br clear=all> |
|||
|- |
|||
| Program Memory Size (KB) || 512 |
|||
[[image:UBW32_board.jpg|thumb|300px|UBW32|right]] |
|||
|- |
|||
Hardware Features: |
|||
| RAM (KB) || 32 |
|||
* Uses PICM32MX460F512L microcontroller |
|||
|- |
|||
* 78 usable I/O pins - all header holes on .100" grid (73 for easy "DIP" style breadboard mounting |
|||
| DMA Channels || 4 |
|||
* miniUSB connection - supplies power and full speed USB connection to PC |
|||
|- |
|||
* 3.3V power regulator |
|||
| SPITM || 2 |
|||
* 5V power regulator allows higher voltage (battery or other) power input |
|||
|- |
|||
* Power Select switch allows selecting between USB and external power (acts as power-on switch) |
|||
| I2C Compatible || 2 |
|||
* Ground, 3.3V and 5V pins available on both sides for vertical breadboard mounting |
|||
|- |
|||
* 5 LEDS - 1 for power, 4 under software use |
|||
| A/D channels || 16 |
|||
* 3 push buttons - 1 for reset, 2 for software use |
|||
|- |
|||
* Header and footprint for USB Host connector - with the right software, allows for USB Host functionality |
|||
| Max A/D Sample Rate || 1000 |
|||
* Minimal board size - very thin (.28" high, 4.4" long, 1" wide) and 2 mounting holes |
|||
|- |
|||
* Input protection fuse allows 500mA from the power supply |
|||
| Input Capture || 5 |
|||
* Pads on underside of board for 5V pull up resistors on all non-analog I/O pins |
|||
|- |
|||
* External input power protected by diode |
|||
| Output Compare/Std. PWM || 5 |
|||
<br clear=all> |
|||
|- |
|||
| 16-bit Digital Timers || 5 |
|||
The UBW32 comes loaded with a Bootloader and Firmware. |
|||
|- |
|||
| Parallel Port || PMP16 |
|||
|- |
|||
| Comparators || 2 |
|||
|- |
|||
| Internal Oscillator || 8 MHz, 32 kHz |
|||
|- |
|||
| RTCC || Yes |
|||
|- |
|||
| I/O Pins || 85 |
|||
|- |
|||
| Pin Count || 100 |
|||
|} |
|||
Revision as of 15:50, 9 July 2009
Link to PIC32 Microchip website.
| Family | PIC32MX4xx |
| Max Speed MHz | 80 |
| Program Memory Size (KB) | 512 |
| RAM (KB) | 32 |
| DMA Channels | 4 |
| SPITM | 2 |
| I2C Compatible | 2 |
| A/D channels | 16 |
| Max A/D Sample Rate | 1000 |
| Input Capture | 5 |
| Output Compare/Std. PWM | 5 |
| 16-bit Digital Timers | 5 |
| Parallel Port | PMP16 |
| Comparators | 2 |
| Internal Oscillator | 8 MHz, 32 kHz |
| RTCC | Yes |
| I/O Pins | 85 |
| Pin Count | 100 |
