Main Page

From Mech
Revision as of 14:20, 16 May 2006 by Stephens (Talk | contribs)
Jump to: navigation, search

The mechatronics design reference page provides a comprehensive list of theory and applications of electronics, sensors, actuators, etc. that can be used for mechatronics-related research and projects.


Contents


Electronics

  • Analog
    • Basic Linear Circuits Review
      • Voltage Dividers
      • RC Transient Response
      • Passive Filters
      • ...
    • Transistors and Diodes
    • Operational Amplifiers
      • Summer
      • Difference Amplifier
      • Low-Pass Filter
      • ...
    • Instrumentation Amps
  • Digital
  • Power Supplies, Voltage Regulation, and Batteries
  • Shielding, Grounding, Noise Suppression, etc.
  • Drawing Schematics and Ordering Printed Circuit Boards (Eagle, Circuit Maker, Trax Maker)
  • Prototyping Tools
    • Oscilloscope
    • Function Generator
    • Mastech Power Supply
    • Fluke III Multimeter
    • Benchtop Multimeter
    • Powered Breadboard
    • Soldering Iron

Sensors

  • Beam Breaker: Laser + Photodiode/Phototransistor
  • Beam Breaker: Optointerrupter
  • Proximity: Optoreflector
  • Proximity: Reed Switch
  • Proximity, Angle: Hall Effect Sensor
  • Angle: Potentiometer
  • Angle: Rotary Encoder
  • Angular Velocity: Tachometer
  • Linear Position: Slide Potentiometer
  • Ambient Light: Photocell
  • Temperature: Thermotransistor IC
  • Audio: Microphone
  • Tilt, Acceleration: Accelerometer
  • Force: Strain Gauge
  • Current: Current Sense Resistor
  • Contact: Microswitch (Limit Switch)

Actuators

  • Brushed DC Motors
    • Theory
    • Practice: Driving Your DC Motor
      • Linear Amplifier
      • Pulse Width Modulation
  • Brushless DC Motors
  • Stepper Motors
    • Theory
    • Practice: Driving Your Stepper
  • RC Servos
  • Solenoids
    • Theory
    • Practice: Driving Your Solenoid
  • AC Motors
  • Actuators Available in the Mechatronics Lab

Mechanical Design

  • Power Transmission
    • Gears (spur, bevel, worm, planetary, harmonic drive, rack and pinion, ball and lead screws, inertia matching)
    • Belt drives
  • Linkages
  • Attaching to a Shaft (flexible couplers, keyways, set screws, compression fit, split clamp)
  • Other: springs/dampers, cams, etc.

The PC/104 Stack

xPC Target Real-Time Operating System

  • Overview of Real-Time Programming with Simulink and xPC Target
  • Creating Your First xPC Program
  • Commonly Used Blocks
  • Code Examples
    • Controlling a DC Motor with an Encoder
    • Something With State Machine
    • Something with Interesting I/O (UDP, RS-232 in real-time; logged data at the end of a run; polled data from a Matlab script)
    • M-functions and S-functions
  • Standalone Mode with xPC Target Embedded Option

QNX Real-Time Operating System

Other Lab Tools

  • The Sensoray 626 DAQ Card
  • The Handyboard Single-Board Computer

Lab Supplies and Data Sheets

Vendors

Personal tools