Main Page
From Mech
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
The mechatronics design reference page provides a comprehensive list of theory and applications of electronics, sensors, actuators, etc. that can be used for mechatronics-related research and projects.
Electronics
- Practical Considerations in Electrical Design
- Electrical Equipment and Software
- Power Supplies, Voltage Regulation, and Batteries
- Drawing Schematics and Ordering Printed Circuit Boards (Eagle, Circuit Maker, Trax Maker)
- Simulating Circuits
- Microcontrollers
- PIC Microcontroller
- Basic Stamp
Sensors
- Angle, Linear Position: Potentiometers
- Beam Breaker: Laser + Photodiode/Phototransistor
- Beam Breaker: Optointerrupter
- Proximity: Optoreflector
- Proximity: Reed Switch
- Proximity, Angle: Hall Effect Sensor
- Angle: Rotary Encoder
- Angular Velocity: Tachometer
- Ambient Light: Photocell
- Temperature: Thermotransistor IC
- Audio: Microphone
- Tilt, Acceleration: Accelerometer
- Force: Strain Gauge
- Current: Current Sense Resistor
- Contact: Microswitch (Limit Switch)
Actuators
- Brushed DC Motors
- Brushless DC Motors
- Stepper Motors
- RC Servos
- Solenoids
- Practice: Driving Your Solenoid
- AC Motors
- Actuators Available in the Mechatronics Lab
Mechanical Design
- Power Transmission
- Gears (spur, bevel, worm, planetary, harmonic drive, rack and pinion, ball and lead screws, inertia matching)
- Belt drives
- Bearings
- Linkages
- Attaching to a Shaft (flexible couplers, keyways, set screws, compression fit, split clamp)
- Other: springs/dampers, cams, etc.
The PC/104 Stack
- Overview
- The PC/104 Lab Kit
- Hardware:
- Advanced: Creating a Working Stack from Parts
- Custom Boards
- Dual PWM Motor Controller
- Dual Linear Amplifier Motor Controller
xPC Target Real-Time Operating System
- Overview of Real-Time Programming with Simulink and xPC Target
- Configuring xPC Host/Target PC
- Quickstart:Creating a simple xPC Program
- Commonly Used Blocks
- Advanced
- Model Properties
- M-file communication
- Using outside of the lab
- Standalone Mode
- Stateflow
- Code Examples
- Controlling a DC Motor with an Encoder
- Something With State Machine
- Using RS-232 and Printing to LCD
- UDP Communications between Target and Host PC
- M-functions and S-functions
- xPC Code From Student Projects
QNX Real-Time Operating System
Lab Supplies and Data Sheets
Vendors
Other Software
- Circuit Schematics and PCB Layout
- LaTex Document Preparation
- Mathematical Formulae
- Document Formatting
- Software Setup
- IEEE Styles
Other Lab Equipment
- Prototyping Tools
- Oscilloscope
- Function Generator
- Mastech Power Supply
- Fluke III Multimeter
- Benchtop Multimeter
- Powered Breadboard
- Soldering Iron
- High Performance Neuromechatronics Benches
- The Sensoray 626 DAQ Card
- The Handyboard Single-Board Computer