Machine Vision Localization System

From Mech
Jump to navigationJump to search

Overview

This is a machine vision systems that tracks multiple targets and can send out the positions via the serial port. It is based upon the Indoor_Localization_System, but has several enhancements and bug fixes. Refer to Indoor_Localization_System for a basic overview of the setup of the system and the workings of the patter identification algorithm.

Major Enhancements/Changes

  • The system will now mark the targets with an overlay and display coordinate data onscreen.
  • The serial output is now formatted for the XBee radio using the XBee's API mode with escape characters.
  • The calibration routine has been improved, and only needs to be performed once.
  • A command interface for sending out commands via the serial port has been added.
  • The system will discard targets too close to the edge of the camera frame to prevent misidentification due to clipping.
  • The origin of the world coordinate is now in the middle, not the lower left corner.

Major Bug Fixes

  • Two major memory leaks fixed.
  • Calibration matricies are now calculated correctly.
  • File handling bug that causes an off-by-one error in LoadTargetData() fixed.