File:Globe-hex-wrench-inserted.jpg
From Mech
Revision as of 15:51, 8 July 2008 by Matt Turpin (talk | contribs) (Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel.)
Size of this preview: 800 × 570 pixels. Other resolutions: 320 × 228 pixels | 1,024 × 730 pixels.
Original file (1,024 × 730 pixels, file size: 105 KB, MIME type: image/jpeg)
Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 16:18, 8 July 2008 | 1,024 × 730 (105 KB) | Matt Turpin (talk | contribs) | Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel. | |
16:17, 8 July 2008 | 2,304 × 1,728 (261 KB) | Matt Turpin (talk | contribs) | Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel. | ||
15:51, 8 July 2008 | 2,304 × 1,728 (416 KB) | Matt Turpin (talk | contribs) | Insert the 0.035 inch hex wrench into the newly exposed slot and turn the pinion until the wrench is inserted into a set screw holding on the encoder wheel. |
You cannot overwrite this file.
File usage
The following page uses this file: