Revision history of "File:Dimensioned Drawing of Steering Fork.pdf"

From Mech
Jump to navigationJump to search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 15:01, 17 March 2010‎ NoahPentelovitch talk contribs‎ 229 bytes +229‎ This is a dimensioned drawing of the front wheel steering fork. The upper shaft of the fork is sized for a press fit into the 1/4" inner diameter bearing, which is press fit on the chassis. The fork is made from 2" Aluminum 6061.
Retrieved from "https://hades.mech.northwestern.edu//index.php/File:Dimensioned_Drawing_of_Steering_Fork.pdf"