Differential Drive Mobile Robot

From Mech
(Difference between revisions)
Jump to: navigation, search
(Graphical User Interface)
(Future Work)

Revision as of 21:56, 14 March 2010

Contents

Introduction

The goal of this project was to create a low cost replacement for the popular E-Puck robot that was better suited to the needs of the current research projects here at Northwestern. The project also entailed developing a control library that would allow future users to easily interface with the robot and integrate it into their research. Specifically, the robot was to meet the following criteria:

Mechanical Goals:

 -Be of a similar size to the E-Puck
 -Be significantly less expensive than the E-Puck
 -Use stepper motors
 -Be easy to manufacture
 -Have an approximate run time of 1 hour

Software Goals:

 -Use the NU32 board for control logic
 -Support wireless communication
 -Develop a control library that can easily be included in a users code
 -Allow the user to specify a velocity vector for the robot to follow
 -Allow the user to specify the robot's position, (x,y,theta), in a global frame
 -Allow the user to directly control the robot's wheel speeds


Mechanical

CAD drawings and description


Electrical

circuit diagram and description


Software

code and description


Graphical User Interface

A GUI was created in processing in order to demonstrate the functionality of the control software and facilitate testing.

The following is an image of the GUI as it appears when it is first opened:

Mobile Robot - Processing GUI.jpg

Modes of Operation:

The program has two modes of operation that can be selected with the "mode" button.

Note: The current mode can be discerned by looking at the white/black box next to the mode button and comparing with the legend at the bottom of the GUI

First, there is a position control mode that allows the user to send the robot to a point in a global frame. This is done by clicking in the white box that takes up the majority of the screen space. Once designated, the new position will appear with a number above it which marks its order relative to all the other requested positions. The white area maps to the surface that the robot is sitting on, and the x-axis, which the robot is aligned with, goes to the right of the screen from the origin at the center. The y-axis originates from the same location and goes upward. Both the location of the origin on the screen and the physical dimensions of the space that the screen area maps to are easily adjustable in the code.

Second, there is a velocity control mode that allows you to specify a velocity vector that the center of the front face of the robot must follow. As before, this vector is created by clicking in the white box at the center of the GUI. The robot is, once again aligned along the x-axis, and the magnitude of the velocity vector is specified by the distance from the origin to the point clicked.

Some other features include the ability to:

-stop the robot with the "stop" button

-move the origin to the robot's current position with the "reset" button

-send the robot back to its starting position with the "home" button

-specify the robot's wheel speed with the "speed" textbox

Download:

insert link to file here


Future Work

new wheels

pcb

1 timer motor control

forward, reverse, rotate functions

other functions to shorten code


Team

This project was created by John (Jake) Ware and Jarvis Shultz. Both are mechanical engineering PhD students at Northwestern University.

Contact:

"Jarvis Schultz" <jarvisschultz2012@u.northwestern.edu>

"John Ware" <johnware2015@u.northwestern.edu>


Personal tools